Welcome to the Pycom forum Forum
    • \[\[global:header.categories\]\]
    • \[\[global:header.recent\]\]
    • \[\[global:header.tags\]\]
    • \[\[global:header.popular\]\]
    • Login

    Explore Pybytes | Official Documentation | Report a Firmware Bug/Issue | GitHub

    GPy with Hologram.io SIM

    Scheduled Pinned Locked Moved GPy
    hologram.io
    100 Posts 10 Posters 42.8k Views 12 Watching
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • T Offline
      tlanier @jmarcelino
      last edited by

      @jmarcelino

      One interesting piece of information is that the AT+CFUN=0 or AT_CFUN=1 commands do not return an "OK" response from the modem. The commands configure the control of the LED according to the manual.

      1 Reply Last reply Reply Quote 0
      • J Offline
        jmarcelino @nathanh
        last edited by jmarcelino

        @nathanh said in GPy with Hologram.io SIM:

        For what it is worth and not trying to take this off the current topic/carrier. But from my attempts at trying to use my FiPy on Telstra where I am under full coverage, I also get the 2,4 result from CEREG but it will also sometimes connect (for a time before it crashes).

        For Telstra/Australia you need to set the correct EARFCN (with 'AT!="addscanfreq band=28 dl-earfcn=9410"'). For the US the modem knows the Verizon network already so you don't need to.

        @tlanier said in GPy with Hologram.io SIM:

        One interesting piece of information is that the AT+CFUN=0 or AT_CFUN=1 commands do not return an "OK" response from the modem. The commands configure the control of the LED according to the manual.

        I'm not sure which manual you're following but on the one we provide CFUN is definitely used to enable/disable the radio: see "2.4 Set Phone Functionality: +CFUN:".

        N T 3 Replies Last reply Reply Quote 0
        • N Offline
          nathanh @jmarcelino
          last edited by

          @jmarcelino said in GPy with Hologram.io SIM:

          For Telstra/Australia you need to set the correct EARFCN (with 'AT!="addscanfreq band=28 dl-earfcn=9410"'). For the US the modem knows the Verizon network already so you don't need to.

          Which is what we are using and documented in the several Telstra posts on the forum and are still waiting on you/Pycom to refer back from meeting with Telstra as @daniel indicated on this thread (https://forum.pycom.io/topic/2769/telstra-lte-cat-m-working-on-fipy-just/21)

          My point was that while the report of 2,4 from CEREG typically indicates no coverage, the actual reason according to the documentation is unknown error and even if it was lack of coverage it did not make sense since I could also get connectivity randomly in the same location with the same device, and the signal strength reporting as good/excellent when it did connect. Which in my mind could potentially indicate other issues with how the modem itself communicates on different networks.

          1 Reply Last reply Reply Quote 0
          • T Offline
            tlanier @jmarcelino
            last edited by

            @jmarcelino
            Sorry, my mistake. I was reading the description of the AT+SQNLED=<mode> command (see below) and thought it was describing the purpose of the AT+CFUN command instead of describing how the LED behaved with the different CFUN values.

            From manual:

            This command configures the control of light of a connected LED. The mode
            setting is persistent after reboot.
            The LED is turned on only when AT+CFUN=1 or 4. It is turned off when
            AT+CFUN=0.
            LED is steadily turned on when the ME is registered to the network and either
            awake or in power saving state. LED flashes when the ME is registered to the
            network and either awake or in power saving state. In this mode, the duration
            of flashing means various states, listed below:
            • AT+CFUN=0 or 4. The ME is stopped or in Airplane mode. The LED is
            permanently turned off.
            • AT+CFUN=1. LTE PS data transfer. The LED is permanently turned on.
            • AT+CFUN=1. The ME is registered to a network, No call, no data transfer
            (in RRC Idle). The LED blinks (typically 1280 ms on, 3840 ms off).
            • AT+CFUN=1. Limited Network Service (no SIM, no PIN, network search).
            The LED blinks (typically 500 ms on, 500 ms off).
            • AT+CFUN=1. The ME is in deep SLEEP (eDRX or PSM). The LED is permanently
            turned off.

            1 Reply Last reply Reply Quote 0
            • T Offline
              tlanier @jmarcelino
              last edited by tlanier

              @jmarcelino
              Below is the code I'm going to use in the GPy plugged into my car USB port. The LED will show me the attach/connection state. This evening I plan to drive to multiple locations to see if I can make it work.

              import pycom
              import socket
              import ssl
              import sys
              import time
              from network import LTE
              
              # send AT command to modem and display response
              def at(cmd):
                  print("modem command: {}".format(cmd))
                  response = lte.send_at_cmd(cmd).split('\r\n')
                  for line in response:
                      print(line)
              
              #####################################################################
              print("CAT M1 Test - V0.2")
              
              print("disable MicroPython contorl of LED")
              pycom.heartbeat(False)
              pycom.rgbled(0xFFFFFF)  # White
              
              print("instantiate LTE object")
              lte = LTE(carrier="verizon")
              print("delay 4 secs")
              time.sleep(4.0)
              
              if lte.isattached():
                  print("LTE was already attached, disconnecting...")
                  lte.disconnect()
                  lte.detach()
                  print("resetting modem...")
                  lte.reset()
                  print("delay 5 secs")
                  time.sleep(5.0)
              
              # using hologram SIM
              at('AT+CGDCONT=1,"IP","hologram"')
              
              # enable network registration and location information unsolicited result code
              # +CEREG: <stat>[,[<tac>],[<ci>],[<AcT>]]
              at('AT+CEREG=2')
              
              print("full functionality level")
              at('AT+CFUN=1')
              time.sleep(1.0)
              
              print("attempt to attach cell modem to base station...")
              lte.attach()
              i = 0
              while not lte.isattached():
                  i = i + 1
                  print("not attached: {} secs".format(i))
              
                  if (i % 2 == 0):
                      pycom.rgbled(0xFF0000)  # Red
                  else:
                      pycom.rgbled(0x000000)  # Off
              
                  # get EPS Network Registration Status:
                  # 0 - not registered
                  # 1 - registered, home network
                  # 2 - not registered, but searching...
                  # 3 - registration denied
                  # 4 - unknown (out of E-UTRAN coverage)
                  # 5 - registered, roaming
                  at('AT+CEREG?')
                  time.sleep(1)
              
              print("connect: start a data session and obtain an IP address")
              lte.connect()
              i = 0
              while not lte.isconnected():
                  i = i + 1
                  print("not connected: {}".format(i))
              
                  if (i % 2 == 0):
                      pycom.rgbled(0x00FF00)  # Green
                  else:
                      pycom.rgbled(0x000000)  # Off
              
                  time.sleep(1.0)
              
              pycom.rgbled(0x0000FF)  # Blue
              
              s = socket.socket()
              s = ssl.wrap_socket(s)
              s.connect(socket.getaddrinfo('www.google.com', 443)[0][-1])
              s.send(b"GET / HTTP/1.0\r\n\r\n")
              print(s.recv(4096))
              s.close()
              
              lte.disconnect()
              lte.dettach()
              
              # end of test
              print("end of test")
              pycom.rgbled(0xFFFF00)    # Yellow
              
              while True:
                  pass
              
              
              J T 2 Replies Last reply Reply Quote 0
              • J Offline
                jmarcelino @tlanier
                last edited by jmarcelino

                @tlanier

                I'm afraid the manual is written by Sequans (who make the modem) and is more of a general guide for all possible implementations.

                The LED on the FiPy/GPy is only connected to the ESP32/MicroPython and not to the modem. The SQNLED command will have no effect.

                The correct way to check for correctly registration is via AT commands and specifically the status check AT+CEREG? Valid registration stats are 2,1 or 2,5 (for MVNOs)

                T 1 Reply Last reply Reply Quote 0
                • T Offline
                  tlanier @jmarcelino
                  last edited by

                  @jmarcelino

                  Thanks, I've updated the code.

                  1 Reply Last reply Reply Quote 0
                  • T Offline
                    tlanier @tlanier
                    last edited by

                    @tlanier
                    I took the Gpy 50 miles down Interstate 85 through West Point, GA and Opelika, AL. The device never attached to a cell tower during the entire trip.

                    J 2 Replies Last reply Reply Quote 0
                    • J Offline
                      jmarcelino @tlanier
                      last edited by

                      @tlanier
                      Were you using the code you posted below? I didn't notice you had changed the code you to calling lte.attach() again. Have you been doing the other tests with this?

                      For setups like Hologram where you do a custom init you need to remove lte.attach() and use AT+CEREG=2 and AT+CFUN=1 manually.

                      As you already have those in the code you need to remove lte.attach() otherwise it will cause problems.

                      T 1 Reply Last reply Reply Quote 0
                      • T Offline
                        tlanier @jmarcelino
                        last edited by

                        @jmarcelino

                        Thanks for catching the misunderstanding!

                        Here's my revised code. The at(cmd) function has been improved to return the modem response as a list making it easier to parse. I've also added logic to break on <tac> = 1 or 5 just in case the isattached() function is not working.

                        I will take the GPy north towards Atlanta today and see if I can connect there.

                        import pycom
                        import socket
                        import ssl
                        import sys
                        import time
                        from network import LTE
                        
                        # send AT command to modem and return response as list
                        def at(cmd):
                            print("modem command: {}".format(cmd))
                            r = lte.send_at_cmd(cmd).split('\r\n')
                            r = list(filter(None, r))
                            print("response={}".format(r))
                            return r
                        
                        #######################################################
                        print("CAT M1 Test - V0.3 - 4/15/18")
                        
                        print("disable MicroPython control of LED")
                        pycom.heartbeat(False)
                        pycom.rgbled(0xFFFFFF)  # White
                        
                        print("instantiate LTE object")
                        lte = LTE(carrier="verizon")
                        print("delay 4 secs")
                        time.sleep(4.0)
                        
                        if lte.isattached():
                            print("LTE was already attached, disconnecting...")
                            lte.disconnect()
                            lte.detach()
                            print("resetting modem...")
                            lte.reset()
                            print("delay 5 secs")
                            time.sleep(5.0)
                        
                        # enable network registration and location information, unsolicited result code
                        at('AT+CEREG=2')
                        
                        print("full functionality level")
                        at('AT+CFUN=1')
                        time.sleep(1.0)
                        
                        # using Hologram SIM
                        at('AT+CGDCONT=1,"IP","hologram"')
                        
                        print("attempt to attach cell modem to base station...")
                        # lte.attach()  # do not use attach with custom init for Hologram SIM
                        
                        i = 0
                        while True:
                            # get EPS Network Registration Status:
                            # +CEREG: <stat>[,[<tac>],[<ci>],[<AcT>]]
                            # <tac> values:
                            # 0 - not registered
                            # 1 - registered, home network
                            # 2 - not registered, but searching...
                            # 3 - registration denied
                            # 4 - unknown (out of E-UTRAN coverage)
                            # 5 - registered, roaming
                            r = at('AT+CEREG?')
                            r0 = r[0]  # +CREG: 2,<tac>
                            r0x = r0.split(',')     # ['+CREG: 2',<tac>]
                            tac = int(r0x[1])       # 0..5
                            print("tac={}".format(tac))
                        
                            if lte.isattached():
                                print("Modem attached (isattached() function worked)!!!")
                                break
                        
                            if (tac==1) or (tac==5):
                                print("Modem attached!!!")
                                break
                        
                            i = i + 1
                            print("not attached: {} secs".format(i))
                        
                            if (i % 2 == 0):
                                pycom.rgbled(0xFF0000)  # Red
                            else:
                                pycom.rgbled(0x000000)  # Off
                        
                            time.sleep(1)
                        
                        print("connect: start a data session and obtain an IP address")
                        lte.connect()
                        i = 0
                        while not lte.isconnected():
                            i = i + 1
                            print("not connected: {}".format(i))
                        
                            if (i % 2 == 0):
                                pycom.rgbled(0x00FF00)  # Green
                            else:
                                pycom.rgbled(0x000000)  # Off
                        
                            time.sleep(1.0)
                        
                        
                        pycom.rgbled(0x0000FF)  # Blue
                        
                        s = socket.socket()
                        s = ssl.wrap_socket(s)
                        s.connect(socket.getaddrinfo('www.google.com', 443)[0][-1])
                        s.send(b"GET / HTTP/1.0\r\n\r\n")
                        print(s.recv(4096))
                        s.close()
                        
                        lte.disconnect()
                        lte.dettach()
                        
                        # end of test, Red LED
                        print("end of test")
                        pycom.rgbled(0xFFFF00)  # Yellow
                        
                        while True:
                            pass
                        
                        T 1 Reply Last reply Reply Quote 0
                        • T Offline
                          tlanier @tlanier
                          last edited by

                          @tlanier

                          I drove through both Newnan, GA and Peachtree City, GA with the GPy running in my car. The device never attached to any tower even though I passed by many towers within visible sight.

                          1 Reply Last reply Reply Quote 0
                          • J Offline
                            jmarcelino @tlanier
                            last edited by

                            Thanks @tlanier

                            Are you able to try it with a Verizon Cat M1 SIM?

                            T 1 Reply Last reply Reply Quote 0
                            • T Offline
                              tlanier @jmarcelino
                              last edited by

                              @jmarcelino

                              Anybody know how to get an evaluation Cat M1 SIM that will work.

                              On the Verizon web page they state: "Machine to Machine Plans are available only to business customers with five or more CLEU lines that have signed a Major Account Agreement. "

                              Verizon Machine to Machine Plans

                              I talked to Kore about a month ago, and they did not offer Cat M1 SIM's at that time.

                              Kore

                              T 1 Reply Last reply Reply Quote 0
                              • T Offline
                                tlanier @tlanier
                                last edited by

                                @tlanier

                                We've talked to the Verizon open development team and they indicated that CAT M1 is on ALL Verizon LTE towers in the country.

                                There's got to be some explanation as to why we cannot connect with the GPy.

                                T 1 Reply Last reply Reply Quote 0
                                • T Offline
                                  tlanier @tlanier
                                  last edited by

                                  @tlanier

                                  The Verizon Wireless HelpDesk @ 800-525-0481 has now told us our Hologram SIM is not a valid SIM on their network. We have contacted Hologram to try to determine what could be the problem. No word yet from Hologram.

                                  ChrisGammellC 1 Reply Last reply Reply Quote 0
                                  • ChrisGammellC Offline
                                    ChrisGammell @tlanier
                                    last edited by

                                    @tlanier said in GPy with Hologram.io SIM:

                                    The Verizon Wireless HelpDesk @ 800-525-0481 has now told us our Hologram SIM is not a valid SIM on their network

                                    Yep, still trying things here as well. As Ryan said over on our forum, it's possible that Verizon does not have direct records of our SIMs on their network and we encourage everyone to contact us directly for connectivity. We understand you're frustrated while we try to get this sussed out, we are as well. The problem with SIM cards that normally "just work"...is when they don't.

                                    ChrisGammellC 1 Reply Last reply Reply Quote 0
                                    • ChrisGammellC Offline
                                      ChrisGammell @ChrisGammell
                                      last edited by

                                      @chrisgammell

                                      Speaking of frustrated, I'm still getting errors from lte.connect(), is there a way to get a more verbose output?

                                      I just saw in the docs that there is a firmware update for the modem as well as as the Pycom boards themselves, going to try that now. Is it possible that that could be contributing to the problem?

                                      T J 2 Replies Last reply Reply Quote 0
                                      • ChrisGammellC Offline
                                        ChrisGammell
                                        last edited by

                                        I added at('at+csq') into the loop and saw that as the device eventually finds its way onto the network here locally, it goes from "99, 99" to "11, 99" or so. Does yours change if you insert that into the loop, @tlanier? Also could you post a picture of your mobile rig? I'm curious about how you have it all hooked up and powered and such.

                                        T 4 Replies Last reply Reply Quote 0
                                        • T Offline
                                          tlanier @ChrisGammell
                                          last edited by

                                          @chrisgammell

                                          I did do the firmware update from:

                                          https://pycom.io/downloads/

                                          I have not done the modem firmware update. Thanks for the link. I will try that first thing in the morning.

                                          1 Reply Last reply Reply Quote 0
                                          • T Offline
                                            tlanier @ChrisGammell
                                            last edited by

                                            @chrisgammell

                                            I'm just using the expansion board 2.0 with the GPy powered using the USB port to my computer desktop. I've also drove around in the car with the unit plugged into the USB port on my car.

                                            I'll try the AT+CSQ command in the morning and post the results.

                                            As a new user the system will only allow me to post every 10 mins so I sitting here waiting for the 10 mins to expire so I can send this post...

                                            1 Reply Last reply Reply Quote 1

                                            Hello! It looks like you're interested in this conversation, but you don't have an account yet.

                                            Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.

                                            With your input, this post could be even better 💗

                                            Register Login
                                            • 1
                                            • 2
                                            • 3
                                            • 4
                                            • 5
                                            • 1 / 5
                                            • First post
                                              Last post

                                            Pycom on Twitter

                                            Pycom