I²C addressees on the Pysense
-
I'm trying to find the used I²C addressees on the Pysense, I need to add a device.
Thanks -
-
So buy a FiPy and use your information to scan the buss hoping that the address I need isn't used..
-
Sorry, you didn't say in your original post you didn't have the module + pysense.
The output is as follows:>>> i2c.scan() [8, 30, 41, 64, 96]You can also look through the libraries here to figure out the addresses:
https://github.com/pycom/pycom-libraries/tree/master/pysense/lib8 = PIC microcontroller (UART + deepsleep)
30 = LIS2HH12
41 = LTR329ALS01
64 = SI7006A20
96 = MPL3115A2
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login