Welcome to the Pycom forum Forum
    • \[\[global:header.categories\]\]
    • \[\[global:header.recent\]\]
    • \[\[global:header.tags\]\]
    • \[\[global:header.popular\]\]
    • Login

    Explore Pybytes | Official Documentation | Report a Firmware Bug/Issue | GitHub

    connect 2 wipy2.0 by WiFi

    Scheduled Pinned Locked Moved WiPy 2&3
    17 Posts 3 Posters 5.8k Views 3 Watching
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • L Offline
      livius
      last edited by livius

      with firmware 9.6

      it repeat

      I (36355) wifi: n:6 0, o:6 1, ap:255 255, sta:6 1, prof:6
I (36476) wifi: n:6 1, o:6 0, ap:255 255, sta:6 1, prof:6
I (36476) wifi: state: 0 -> 2 (b0)
I (36479) wifi: state: 2 -> 3 (0)
I (36487) wifi: state: 3 -> 5 (10)

      ets Jun  8 2016 00:22:57

rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
ets Jun  8 2016 00:22:57

rst:0x10 (RTCWDT_RTC_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0x00
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:QIO, clock div:2
load:0x3fff9010,len:8
load:0x3fff9018,len:812
ho 0 tail 12 room 4
load:0x40078000,len:3692
load:0x4009f000,len:944
entry 0x4009f1f0
rtc v134 Oct 20 2016 12:36:18
XTAL 40M
I (824) phy: phy_version: 246, Nov 18 2016, 17:30:07, 0, 0

tcpip_task_hdlxxx : 3ffdef94, prio:18,stack:2048
frc2_timer_task_hdl:3ffdfa9c, prio:22, stack:2048
I (968) wifi: pp_task_hdl : 3ffdfc68, prio:23, stack:8192
mode : softAP(24:0a:c4:00:a8:bf)
dhcp server start:(ip: 192.168.4.1, mask: 255.255.255.0, gw: 192.168.4.1)
wifi_sta
mode : sta(24:0a:c4:00:a8:be)
livius
wipy-wlan-6ec2
SoftAP-9F
vnet-509F64
UPC0838976
UPC Wi-Free
2.4G-Vectra-WiFi-B7C11C
TP-LINK_9A6D1E
UPC Wi-Free
2.4G-vnet-1C0A58
keke
DIRECT-y6-BRAVIA
UPC Wi-Free
UPC0040392
I (5100) wifi: n:6 1, o:6 0, ap:255 255, sta:6 1, prof:6
I (6076) wifi: state: 0 -> 2 (b0)
I (6077) wifi: state: 2 -> 3 (0)
I (6081) wifi: state: 3 -> 5 (10)
I (16081) wifi: state: 5 -> 0 (2)
I (16081) wifi: n:6 0, o:6 1, ap:255 255, sta:6 1, prof:6
I (16202) wifi: n:6 1, o:6 0, ap:255 255, sta:6 1, prof:6
I (16203) wifi: state: 0 -> 2 (b0)
I (16207) wifi: state: 2 -> 3 (0)
I (16212) wifi: state: 3 -> 5 (10)
I (26212) wifi: state: 5 -> 0 (2)
I (26213) wifi: n:6 0, o:6 1, ap:255 255, sta:6 1, prof:6
I (26334) wifi: n:6 1, o:6 0, ap:255 255, sta:6 1, prof:6
I (26334) wifi: state: 0 -> 2 (b0)
I (26338) wifi: state: 2 -> 3 (0)
I (26354) wifi: state: 3 -> 5 (10)
I (36354) wifi: state: 5 -> 0 (2)
I (36355) wifi: n:6 0, o:6 1, ap:255 255, sta:6 1, prof:6
I (36476) wifi: n:6 1, o:6 0, ap:255 255, sta:6 1, prof:6
I (36476) wifi: state: 0 -> 2 (b0)
I (36479) wifi: state: 2 -> 3 (0)
I (36487) wifi: state: 3 -> 5 (10)

      this is my code - in file 'wifi_sta.py' and i execute it from boot.py as execfile('wifi_sta.py'):

      import pycom
import machine
from network import WLAN

print('wifi_sta')
pycom.heartbeat(0)
pycom.heartbeat(1)
pycom.rgbled(0x00ff00)

wlan = WLAN(mode=WLAN.STA)
nets = wlan.scan()
for net in nets:
   print(str(net.ssid))
if not wlan.isconnected():
	#wlan.ifconfig(config=('192.168.4.2', '255.255.255.0', '192.168.4.1', '192.168.4.1'))
	#wlan.connect('wipy-wlan-a8be', auth=(WLAN.WPA2, 'www.wipy.io'), timeout=5000)
	wlan.connect('wipy-wlan-6ec2', auth=(WLAN.WPA2, 'www.wipy.io'), timeout=5000)	

	while not wlan.isconnected():
		machine.idle() # save power while waiting		
	print('WLAN connection succeeded!')
	pycom.heartbeat(0)
	pycom.heartbeat(1)
	pycom.rgbled(0x00ff00)

      also if you uncomment line

      wlan.ifconfig(config=('192.168.4.2', '255.255.255.0', '192.168.4.1', '192.168.4.1'))

      and also if i change

      while not wlan.isconnected():
		machine.idle()

      to
      pass
      time.sleep_ms(10)

      think about people first, then computers

      1 Reply Last reply Reply Quote 0
      • L Offline
        livius
        last edited by livius

        Any help? Can someone successfully connect two Wipy 2 together?

        think about people first, then computers

        A 2 Replies Last reply Reply Quote 0
        • A Offline
          abilio @livius
          last edited by

          @livius. I'm going to run some tests later and come back to you with a result.

          1 Reply Last reply Reply Quote 1
          • A Offline
            abilio @livius
            last edited by

            @livius, I tried something similar to your setup, and wasn't able to reproduce it. Using two LoPys (internally just a WiPy with the LoRa radio attached), I proceed to connect over serial port to both. Did this in one of them over the REPL:

            from network import WLAN

wlan = WLAN(mode=WLAN.STA)
nets = wlan.scan() # just to get a list
print(str(nets))

wlan.connect(ssid='lopy-wlan-be54', auth=(WLAN.WPA2, 'www.pycom.io')) # put your ssid here

# waited for a few seconds (counted to 10)
wlan.isconnected() # this printed true

            That's the most trivial test I could run. To rule out some possible causes, I want to ask you to try the same, using your own ssid, over serial REPL, and come back with the results to me.

            PS: I also tried the version with the loop, and it worked the way it's supposed

            1 Reply Last reply Reply Quote 0
            • L Offline
              livius
              last edited by

              testet from REPL - result are near to positive

              >>> import os
>>> os.uname()
(sysname='WiPy', nodename='WiPy', release='0.9.6.b1', version='v1.8.6-40-gd10463e on 2016-11-25', machine='WiPy with ESP32')
>>> from network import WLAN
>>> wlan = WLAN(mode=WLAN.STA)
mode : sta(24:0a:c4:00:a8:be)
>>> nets = wlan.scan()
>>> print(str(nets))
[(ssid='UPC0838976', bssid=b'\x8c\x04\xff\xf5\xae\x8a', sec=4, channel=1, rssi=-42), (ssid='wipy-wlan-6ec2', bssid=b'$\n\xc4\x00n\xc3', sec=3, channel=6, rssi=-42), (ssid='UPC Wi-Free', bssid=b'\x8e\x04\xff\xf5\xae\x8c', sec=5, channel=1, rssi=-44), (ssid='vnet-509F64', bssid=b'pT\xd2b\xc4\xda', sec=4, channel=11, rssi=-49), (ssid='livius', bssid=b'\x000O\x8b\x0c\x08', sec=4, channel=9, rssi=-50), (ssid='2.4G-Vectra-WiFi-B7C11C', bssid=b'\x84\x00-  <', sec=4, channel=1, rssi=-65), (ssid='2.4G-vnet-1C0A58', bssid=b't\x85*3 \xd7', sec=4, channel=1, rssi=-75), (ssid='UPC1387285', bssid=b'\x8c\x04\xff{bL', sec=4, channel=1, rssi=-79), (ssid='UPC Wi-Free', bssid=b'\x8e\x04\xff{bN', sec=5, channel=1, rssi=-80), (ssid='TP-LINK_9A6D1E', bssid=b'\xb0Hz\x9am\x1e', sec=3, channel=1, rssi=-80), (ssid='keke', bssid=b'\xb0Hz\xbe\xf6\xa4', sec=3, channel=4, rssi=-84), (ssid='Misza', bssid=b'\x00\x1d~\x91]\x07', sec=3, channel=6, rssi=-88), (ssid='vnet-A6EA06', bssid=b'\x0cT\xa5E*\xc9', sec=4, channel=11, rssi=-88), (ssid='vnet-EC0D8E', bssid=b'T\xbe\xf7\nEN', sec=4, channel=11, rssi=-88), (ssid='UPC Wi-Free', bssid=b'\x02&$>\xaa\x9b', sec=5, channel=7, rssi=-90)]
>>> wlan.connect(ssid='wipy-wlan-6ec2', auth=(WLAN.WPA2, 'www.pycom.io'))
>>> I (283825) wifi: n:6 1, o:6 0, ap:255 255, sta:6 1, prof:6
I (284800) wifi: state: 0 -> 2 (b0)
I (284804) wifi: state: 2 -> 3 (0)
I (284820) wifi: state: 3 -> 5 (10)
I (284836) wifi: connected with wipy-wlan-6ec2, channel 6
wlan.isconnected()
True
>>>

              but here we have different timings between commands - in real script i have not pauses between commands as i have b etween typing by REPL

              and as you can see above there is same but only once response with lines:

              >>> I (283825) wifi: n:6 1, o:6 0, ap:255 255, sta:6 1, prof:6
I (284800) wifi: state: 0 -> 2 (b0)
I (284804) wifi: state: 2 -> 3 (0)
I (284820) wifi: state: 3 -> 5 (10)

              think about people first, then computers

              A 1 Reply Last reply Reply Quote 0
              • A Offline
                abilio @livius
                last edited by

                @livius, ok, at least we know you get similar results to me. Let me try again to reproduce yours. Thanks a lot for your feedback.

                1 Reply Last reply Reply Quote 0
                • L Offline
                  livius
                  last edited by

                  i can provide you my files
                  if you will be unable to reproduce issue

                  think about people first, then computers

                  A 1 Reply Last reply Reply Quote 0
                  • A Offline
                    abilio @livius
                    last edited by

                    @livius, I've been caught in several things but I didn't forget you. If you can place your code in pastebin and pass the link, that will let us reproduce it perfectly ;)

                    1 Reply Last reply Reply Quote 0
                    • L Offline
                      livius
                      last edited by livius

                      the files are:
                      http://konwertuj.com/content/main.py.txt
                      http://konwertuj.com/content/boot.py.txt
                      http://konwertuj.com/content/wifi_sta.py.txt
                      http://konwertuj.com/content/wifi_ap.py.txt

                      remove .txt extension after download

                      think about people first, then computers

                      1 Reply Last reply Reply Quote 0
                      • L Offline
                        livius
                        last edited by

                        with newest firmware 9.7 same

                        UPC1334070
I (6398) wifi: n:6 1, o:6 0, ap:255 255, sta:6 1, prof:6
I (7374) wifi: state: 0 -> 2 (b0)
I (7376) wifi: state: 2 -> 3 (0)
I (7380) wifi: state: 3 -> 5 (10)
I (17381) wifi: state: 5 -> 0 (2)
I (17381) wifi: n:6 0, o:6 1, ap:255 255, sta:6 1, prof:6
I (17502) wifi: n:6 1, o:6 0, ap:255 255, sta:6 1, prof:6
I (17503) wifi: state: 0 -> 2 (b0)
I (17504) wifi: state: 2 -> 3 (0)
I (17507) wifi: state: 3 -> 5 (10)
I (27508) wifi: state: 5 -> 0 (2)

                        and this is on WiPy in AP mode

                        I (1018844) wifi: station: 24:0a:c4:00:a8:be leave, AID = 1
I (1018844) wifi: n:6 1, o:6 1, ap:6 1, sta:255 255, prof:6
I (1018982) wifi: n:6 1, o:6 1, ap:6 1, sta:255 255, prof:6
I (1018982) wifi: station: 24:0a:c4:00:a8:be join, AID = 1, n, 40U
I (1028985) wifi: station: 24:0a:c4:00:a8:be leave, AID = 1
I (1028986) wifi: n:6 1, o:6 1, ap:6 1, sta:255 255, prof:6
I (1029109) wifi: n:6 1, o:6 1, ap:6 1, sta:255 255, prof:6
I (1029109) wifi: station: 24:0a:c4:00:a8:be join, AID = 1, n, 40U

                        think about people first, then computers

                        1 Reply Last reply Reply Quote 0
                        • L Offline
                          livius
                          last edited by livius

                          this is what i got when i added sleep_ms(100) between every commands
                          maybe this is much more informative (file name - wdev.c)

                          rst:0x10 (RTCWDT_RTC_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0x00
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:QIO, clock div:2
load:0x3fff9010,len:8
load:0x3fff9018,len:812
ho 0 tail 12 room 4
load:0x40078000,len:3692
load:0x4009f000,len:944
entry 0x4009f1f0
rtc v134 Oct 20 2016 12:36:18
XTAL 40M
I (858) phy: phy_version: 246, Nov 18 2016, 17:30:07, 0, 0

tcpip_task_hdlxxx : 3ffdf30c, prio:18,stack:2048
frc2_timer_task_hdl:3ffdfe14, prio:22, stack:2048
I (1005) wifi: pp_task_hdl : 3ffeb6cc, prio:23, stack:8192
wdev.c 1327

                          and wipy hang totally
                          but after manual restart same info as before:

                          I (67836) wifi: state: 5 -> 0 (2)
I (67836) wifi: n:6 0, o:6 1, ap:255 255, sta:6 1, prof:6
I (67957) wifi: n:6 1, o:6 0, ap:255 255, sta:6 1, prof:6
I (67958) wifi: state: 0 -> 2 (b0)
I (67962) wifi: state: 2 -> 3 (0)
I (67998) wifi: state: 3 -> 5 (10)

                          think about people first, then computers

                          A 1 Reply Last reply Reply Quote 0
                          • A Offline
                            abilio @livius
                            last edited by

                            @livius, thanks for your status update. We're still looking into this issue. I'll come back at you when I get more information.

                            1 Reply Last reply Reply Quote 0
                            • L Offline
                              livius
                              last edited by livius

                              with newest firmware still the same :(

                              >>> os.uname()
(sysname='WiPy', nodename='WiPy', release='1.0.0.b1', version='v1.8.6-251-g2fb950d on 2016-12-16', machine='WiPy with ESP32')

                              rst:0x10 (RTCWDT_RTC_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0x00
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:QIO, clock div:2
load:0x3fff9010,len:8
load:0x3fff9018,len:812
ho 0 tail 12 room 4
load:0x40078000,len:3692
load:0x4009f000,len:944
entry 0x4009f1f0
tcpip_task_hdlxxx : 3ffedb2c, prio:18,stack:2048
I (2440) wifi: frc2_timer_task_hdl:3ffef74c, prio:22, stack:2048
I (2451) wifi: pp_task_hdl : 3fff20c8, prio:23, stack:8192
I (3427) wifi: mode : softAP (24:0a:c4:00:a8:bf)
dhcp server start:(ip: 192.168.4.1, mask: 255.255.255.0, gw: 192.168.4.1)
wifi_sta
I (3613) wifi: mode : sta (24:0a:c4:00:a8:be)
vnet-509F64
wipy-wlan-6ec2
SoftAP-9F
UPC0838976
UPC Wi-Free
2.4G-vnet-1C0A58
TP-LINK_9A6D1E
keke
UPC Wi-Free
2.4G-Vectra-WiFi-B7C11C
DIRECT-y6-BRAVIA
UPC0040392
UPC Wi-Free
vnet-EC0D8E
I (7001) wifi: n:6 1, o:6 0, ap:255 255, sta:6 1, prof:6
I (7977) wifi: state: init -> auth (b0)
I (7983) wifi: state: auth -> assoc (0)
I (7989) wifi: state: assoc -> run (10)
I (17989) wifi: state: run -> init (2)
I (17990) wifi: n:6 0, o:6 1, ap:255 255, sta:6 1, prof:6
I (18111) wifi: n:6 1, o:6 0, ap:255 255, sta:6 1, prof:6
I (18111) wifi: state: init -> auth (b0)
I (18113) wifi: state: auth -> assoc (0)
I (18128) wifi: state: assoc -> run (10)
I (28128) wifi: state: run -> init (2)
I (28129) wifi: n:6 0, o:6 1, ap:255 255, sta:6 1, prof:6
I (28250) wifi: n:6 1, o:6 0, ap:255 255, sta:6 1, prof:6
I (28250) wifi: state: init -> auth (b0)
I (28255) wifi: state: auth -> assoc (0)
I (28269) wifi: state: assoc -> run (10)
I (38269) wifi: state: run -> init (2)
I (38270) wifi: n:6 0, o:6 1, ap:255 255, sta:6 1, prof:6
I (38391) wifi: n:6 1, o:6 0, ap:255 255, sta:6 1, prof:6
I (38392) wifi: state: init -> auth (b0)
I (38396) wifi: state: auth -> assoc (0)
I (38404) wifi: state: assoc -> run (10)
I (48404) wifi: state: run -> init (2)
I (48404) wifi: n:6 0, o:6 1, ap:255 255, sta:6 1, prof:6
I (48526) wifi: n:6 1, o:6 0, ap:255 255, sta:6 1, prof:6
I (48526) wifi: state: init -> auth (b0)
I (48528) wifi: state: auth -> assoc (0)
I (48545) wifi: state: assoc -> run (10)
I (58546) wifi: state: run -> init (2)
I (58546) wifi: n:6 0, o:6 1, ap:255 255, sta:6 1, prof:6
I (58667) wifi: n:6 1, o:6 0, ap:255 255, sta:6 1, prof:6
I (58668) wifi: state: init -> auth (b0)
I (58673) wifi: state: auth -> assoc (0)
I (58677) wifi: state: assoc -> run (10)
I (68677) wifi: state: run -> init (2)
I (68678) wifi: n:6 0, o:6 1, ap:255 255, sta:6 1, prof:6
I (68799) wifi: n:6 1, o:6 0, ap:255 255, sta:6 1, prof:6
I (68800) wifi: state: init -> auth (b0)
I (68802) wifi: state: auth -> assoc (0)
I (68808) wifi: state: assoc -> run (10)
I (78809) wifi: state: run -> init (2)
I (78809) wifi: n:6 0, o:6 1, ap:255 255, sta:6 1, prof:6
I (78930) wifi: n:6 1, o:6 0, ap:255 255, sta:6 1, prof:6
I (78931) wifi: state: init -> auth (b0)
I (78934) wifi: state: auth -> assoc (0)
I (78939) wifi: state: assoc -> run (10)
I (88940) wifi: state: run -> init (2)
I (88940) wifi: n:6 0, o:6 1, ap:255 255, sta:6 1, prof:6
I (89061) wifi: n:6 1, o:6 0, ap:255 255, sta:6 1, prof:6
I (89062) wifi: state: init -> auth (b0)
I (89065) wifi: state: auth -> assoc (0)
I (89074) wifi: state: assoc -> run (10)

                              think about people first, then computers

                              1 Reply Last reply Reply Quote 0
                              • L Offline
                                livius
                                last edited by

                                this is amazing that this was so simple like wrong password from some old documentation :)
                                connected two wipy2 together

                                rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0x00
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:QIO, clock div:2
load:0x3fff9010,len:8
load:0x3fff9018,len:812
ho 0 tail 12 room 4
load:0x40078000,len:3692
load:0x4009f000,len:944
entry 0x4009f1f0
tcpip_task_hdlxxx : 3ffedcb0, prio:18,stack:2048
I (1843) wifi: frc2_timer_task_hdl:3ffef8a8, prio:22, stack:2048
I (1849) wifi: pp_task_hdl : 3fff2170, prio:23, stack:8192
I (2825) wifi: mode : softAP (24:0a:c4:00:a8:bf)
dhcp server start:(ip: 192.168.4.1, mask: 255.255.255.0, gw: 192.168.4.1)
wifi_sta
I (3008) wifi: mode : sta (24:0a:c4:00:a8:be)
wipy-wlan-6ec2
UPC0838976
UPC Wi-Free
vnet-509F64
TP-LINK_9A6D1E
2.4G-Vectra-WiFi-B7C11C
2.4G-vnet-1C0A58
UPC Wi-Free
keke
UPC1387285
vnet-EC0D8E
UPC Wi-Free
UPC8578324
DIRECT-y6-BRAVIA
STAWIK iNTERNET
UPC Wi-Free
I (6100) wifi: n:6 1, o:6 0, ap:255 255, sta:6 1, prof:6
I (7074) wifi: state: init -> auth (b0)
I (7077) wifi: state: auth -> assoc (0)
I (7086) wifi: state: assoc -> run (10)
I (7101) wifi: connected with wipy-wlan-6ec2, channel 6
WLAN connection succeeded!
MicroPython v1.8.6-251-g2fb950d on 2016-12-16; WiPy with ESP32
Type "help()" for more information.
>>> Connected to AP wipy-wlan-6ec2 channel 6I (17086) wifi: pm open, type:0, st: 0, sending null data: 0

                                think about people first, then computers

                                1 Reply Last reply Reply Quote 0

                                Hello! It looks like you're interested in this conversation, but you don't have an account yet.

                                Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.

                                With your input, this post could be even better 💗

                                Register Login
                                • 1 / 1
                                • First post
                                  Last post

                                Pycom on Twitter

                                Pycom