testing machine deepsleep

[serafimsaudade]

import machine
import pycom
import os
import time

i=True
while i==True:
    print('normal mode 5sec')
    time.sleep(5)
    i = False

print('deepsleep mode 5sec')
machine.deepsleep(5000)
print('deepsleep done')

Hi,
I'm trying to run this code. But the last print never appear.
I'm running the latest fw.

Cumps,

[jcaron]

@serafimsaudade That would be the expected result, as when the board wakes up after deep sleep, it acts as a reset and it restarts from the top of boot.py + main.py. During deep sleep RAM etc. are not powered, so the board can't just resume execution at the next instruction.

[serafimsaudade]

I'm connected to the gpy over uart, and the reset never occur.
:(

update: today I will update the firmware, and give another try.

[serafimsaudade]

Hi guys,
After done some test I realize that the GPY only exist from deepsleep if is power with 5V.

If I power the GYP with 3.5V it hangs forever in deepsleep.

This is normal?

Cumps,