Pin mapping for SPI / I2C connection to Cinterion TC65T module
-
I need a serial connection between a LoPy4 and an (older) TC65T GSM module. The GSM module has a combined I2C/SPI interface sharing 2 pins. Yet i do not know if my software will use SPI oder I2C for interfacing. What pin mapping should i use on my LoPy4, so that i later can decide if i use SPI oder I2C and get not conflicts?
The pin mapping of the TC65T modem is as follows, sharing pins 1+2 for I2C and SPI:
(Pin) Signal name // Pin Description (13) SPICS Chip select // selects and activates the external device via a low signal. (14) SPIDI Data in // serial data input line (from external device to TC65 Terminal) (1) I2CDAT_SPIDO Data out // serial data output line (from TC65 Terminal to external device) (2) I2CCLK_SPICLK // Serial clock line
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login