Internal hall sensor question
-
Hello!
It's currently possible to get the internal ESP32 hall sensor status? My idea is to trigger OTA or wake from deepsleep when a magnet is near the device (if the hall sensor is sensible enough...).
Also I find that temperature read is implemented but no idea how to interpret this value (returns values arround 136) = 36ºC?
Best regards!
-
@river In the loboris variant of micropython.org port there is support for the hall sensor. I tried that, just to determine, that the hall sensor is pretty insensitive. Better use an external hall sensor connected to a GPIO.
The internal temperature sensor works, but has a huge variation form device to device. See the discussion here: https://github.com/micropython/micropython/pull/3933
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login