Confirm voltage criteria to use with wipy and I2C based digital barometer
-
Hello, I am using IC - MPL115A2 in Digital barometric sensor https://store.ncd.io/product/mpl115a2-digital-barometer-50-to-115-kpa-i2c-mini-module/ which is operated under 2.7v to 5.5v but not sure whether its possible to use same voltage supply which we are giving to wipy is good enough for these sensors or we have to give external supply ? I have just started monitor these kind of I2C based sensors and still going thorough confusion which I need to understand while interface through wipy, any kind suggestion on this will be helpful .
-
@nobo23 Accirdoig to the datasheet, you can operate that device from the 3.3V output of the WiPy. That matches the signal levels of the I2C interface. Since the module has built-in pull-up resistors (if you install the jumpers), you do not have to add additional ones.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login