Exp Board 2.0 serial communication problem
-
@robert-hh Now I'm able to update FiPy using 2.0 board- i forgot to unplug the usb cable after bridging P23 and GND.
But I'm still stuck during serial port connection in VS Code
-
Correction:
Now I've noticed that one of the boards is v3.0 my mistake. They are very similar. Its because I've ordered 2.0V and I've got 3.0V
-
@szyba91 The REPL prompt is, what's showing the >>> lead-in.
REPL stands for: Read-Eval-Print-Loop
-
@robert-hh said in Exp Board 2.0 serial communication problem:
Yes I have to different boards version but there are both Board 2.0, one is older revision.
Excuse me I'm not familiar with notion "REPL promp" could you expalin ?
As for updating V2 board : P3 or P23 to GND ?
Does the different updates procedure is related with getting stack during connection ? Actually it is my main concern.
-
@szyba91 Actual it seems that you have two different boards. The one with a v2.1 marking is a Version 2 board, the one with the V3.0 marking is a Version 3 board. Both should work well with the REPL prompt. If the V2 board does not do that any mode, check the jumpers on the board. Sometimes they get loose.
Updating works different with the two board. The V3 board does not require any additional action. The V2 board requires to place a jumper between GND and P3 an dthen push reset.
