LoPy Cannot Change DR or SF in LoRaWAN mode (always SF10, dr 0, bw 125kHz)

[brady.aiello]

I'm having a lot of difficulty manually setting the data rate and spread factor with the LoPy. I'm wondering if anyone has been able to manually set dr and sf in LoRaWAN mode? I'm doing this:

lora = LoRa(mode=LoRa.LORAWAN, sf=7, region=LoRa.US915)

for i in range(72):
    if 0 <= i < 8:
        print(curr)
        lora.add_channel(index=i, frequency=curr, dr_min=3, dr_max=3)
        curr += f_inc
    else:
        lora.remove_channel(i)

lora.join(activation=LoRa.ABP, auth=(dev_addr, nwk_skey, app_skey))
s = socket.socket(socket.AF_LORA, socket.SOCK_RAW)

What happens is that the first 7 messages won't even be detected by the gateway. The 8th message uses sf 10 on 905.1. If I set this value on the socket itself, with

s.setsockopt(socket.SOL_LORA, socket.SO_DR, 3)

nothing is ever picked up by the gateway. BTW, I'm using TTN's US frequencies. Thanks.

[jcaron]

@brady-aiello what gateway are you using, and what frequencies is it listening on?

[brady.aiello]

@jcaron The Rising HF RHF301, on the frequencies described here:
https://account.thethingsnetwork.org/api/v2/frequency-plans/US_902_928

So, it looks like that's
903900000
904100000
904300000
904500000
904700000
904900000
905100000
905300000
all on 125 kHz bw.

[robert-hh]

This post is deleted!