Lopy4 to Lopy4 with BLE get_adv() always none [Solved]

[Amarulp]

Hello everyone!
I was trying to connect two Lopy4 with BLE, but bluetooth.get_adv() is always returning none. Just in a few cases it and using the same code work but then stopped.

import ubinascii
from network import Bluetooth
from time import sleep

bt = Bluetooth()
bt.init()

bt.set_advertisement(name="lopy", manufacturer_data="lopy_v1")
if bt.isscanning():
    bt.stop_scan()

bt.start_scan(-1)
while bt.isscanning():
    adv = bt.get_adv()
    if adv:
        print(adv)

Both with the same code, and different names (I also try it with the same name)

Thank you

[Eric73]

@amarulp Hello, I think you cannot, at same time, advertise and scan for device with a lopy but you can test it in case, with some luck it can work.
I suggest you to have on one lopy to advertise (btw you must add in your code bt.advertise(true) after your bt.set_advertisement according to documentation) and the other lopy do bluetooth scanning.

[Amarulp]

@eric73
Thank you so much!
It worked! Also, it can scan and advertise at the same time.