Frustrating Board - Cannot get started
I would appreciate the community's help as I have never had that much trouble getting any micro to run.
I have been able to upgrade the firmware. I have also been able to access the board using IP 192.168.4.1.
@jimmie glad that copy and paste is your biggest problem :)
THANK YOU VERY MUCH.
I have never seen this before as I always copy the code to notepad first to get rid of unprintable characters. Not sure what the U+200B is?!
It is working now after getting rid of that character..
Those are just spaces and carriage returns/line feeds ..
@jimmie looks like you have some nonprintable characters in there.
jimmie last edited by jimmie
I was able to run the attached boot.py. However, when I uploaded to the board, I get an error:
Connecting to a Pycom device... Traceback (most recent call last): File "boot.py", line 4, in <module> NameError: name '' is not defined Pycom MicroPython 1.18.1.r1 [v1.8.6-849-b0520f1] on 2018-08-29; WiPy with ESP32 Type "help()" for more information. >>>
>>> Running c:\Users\ttc\Desktop\boot.py >>> >>> ♦Traceback (most recent call last): File "<stdin>", line 13, in <module> OSError: the requested operation is not possible ♦> Pycom MicroPython 1.18.1.r1 [v1.8.6-849-b0520f1] on 2018-08-29; WiPy with ESP32 Type "help()" for more information. >>> >>>
@cmisztur Wipy 3.0 and Expansion Board 3.0.
Was able to run the RGB example but cannot run the attached boot.py
Which CPU and board did you get?