joining OTAA on specific channels
-
Hi
I want to join OTAA over specific channels and then send data again on some other specific channels, how can I achieve this ?
-
@abhishek2101 it's depend in which region you work.
If it's EU868 documentation say to use
lora.add_channel(index=0, frequency=868000000, dr_min=5, dr_max=6)
lora.add_channel(index=1, frequency=868000000, dr_min=5, dr_max=6)
lora.add_channel(index=2, frequency=868000000, dr_min=5, dr_max=6)
and join will use 868000000 for TX and RX1 (RX2 is always same frequency in lorawan)
You cannot choice the channel used by the stack but as the 3 mandatory channel are in same freq.... -
@eric73 said in joining OTAA on specific channels:
@abhishek2101 it's depend in which region you work.
If it's EU868 documentation say to use
lora.add_channel(index=0, frequency=868000000, dr_min=5, dr_max=6)
lora.add_channel(index=1, frequency=868000000, dr_min=5, dr_max=6)
lora.add_channel(index=2, frequency=868000000, dr_min=5, dr_max=6)
and join will use 868000000 for TX and RX1 (RX2 is always same frequency in lorawan)
You cannot choice the channel used by the stack but as the 3 mandatory channel are in same freq....Not it is just an example, in practice there are no such channel used as 868.0 MHz!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login