how do i view files on my pycom board?



  • This post is deleted!


  • @oved-yavine
    For me this is the usual behavior of pymakr ide. The way I solve this is: push disconnect and restart from the host the WiFi connection. As soon as the WiFi connection is established, do a (re) connect and voila the RESP >>> prompt will appear.
    With a Py board reset the WiFi state is not "in sync". Re-establishing the WiFi connection from the host forces this.



  • i decided to install pymakr and not use VS code plugin...
    pymakr will not connect to the board (vs code plug in did connect)

    Pycom MicroPython 1.18.1.r1 [v1.8.6-849-b0520f1] on 2018-08-29; LoPy with ESP32
    Type "help()" for more information.
    Reattempting in a few seconds...
    Connecting to a LoPy...
    Error while communicating with the LoPy! (click to attempt to reconnect)
    Connecting to a LoPy...
    Error while communicating with the LoPy! (click to attempt to reconnect)
    Connecting to a LoPy...
    Pycom MicroPython 1.18.1.r1 [v1.8.6-849-b0520f1] on 2018-08-29; LoPy with ESP32
    Type "help()" for more information.

    Reattempting in a few seconds...
    Connecting to a LoPy...
    Error while communicating with the LoPy! (click to attempt to reconnect)


Log in to reply
 

Pycom on Twitter