Well that sucks....
-
-
@cmisztur Gross. That looks like a challenge for your soldering skills.
I had that experience with a broken USB Micro plug on the smartphone of my daughter. The problem there was to get the old plug out without damaging the board. You are beyond that step. Soldering the new plug to the board was easier. -
@robert-hh I tried re-soldering and failed.
-
@cmisztur Too bad. Then you still could try to solder a USB cable to the open pads. Once that works, you can fix it with epoxy. Not beautiful, but possible.
-
@robert-hh Eh yeah, I'll give that a shot.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login