Has anyone been able to receive SMS messages with the GPy?
The solution was to do: AT+CPMS="SM","SM","SM"
Before I was doing: AT+CPMS="SM" which does not work
@stevo52 Odd should not be considered spam. If you'd like them posted in the thread feel free to pm them to me and ill post them here on your behalf :)
Stevo52 last edited by Stevo52
@paul-thornton Hi Paul, yes, AT commands are used - as with the actual LTE setup, but are indeed workable (well, they work on the Telstra network here in OZ). I tried to post a couple of examples from the manual here, but I was advised that the content was considered 'spam'?.
So anyone wanting to try, should get the document I mentioned and refer to the relevant chapter. There isn't a huge range of commands, but it's just SMS anyway? I tried sending normal and multi-line sms, in both directions, at normal and high priority - all worked fine once I worked the exact syntax requirements out and 'built' the commands. But I have only dipped a toe in thus far, not really developed any serious code application.
@stevo52 I went and spoke to the team. and your correct the modem does indeed support SMS. That said we do not have any form of API to read / send them exposed to python. but that the features should work via raw AT commands.
They suggested that perhaps https://pypi.org/project/sms might be a suitable target for modification.
Stevo52 last edited by
@tlanier SMS with the GPY is not something I have tried yet, but I added it to my list of of things to investigate further, a few months ago. I could see SMS being useful to low level system status updates for the project I am developing.
The 'Monarch Platform LR188.8.131.52 AT Commands Reference Manual' that I downloaded to help me understand the LTE configuration does have some references to SMS use in Chapter 6: SMS Proprietary Commands. This makes me think there is some capability in the GPY. As I said, I haven't tried to make it work yet, but you could take a look in that document? I will get to that sometime in the next couple of weeks, after I sort out more pressing code issues.
Is there some AT command which enables/disables SMS messages?
Ill put this to the team and see what I can find out.
Below is what I've tried with no luck using a Hologram SIM. Am I just wasting my time or should this work?
Does the CAT-M1 network support SMS messaging?
- surely it does
Does GPy modem support SMS messaging?
- I would think so, but I have found no evidence that it does.
Does Hologram SIM support SMS messaging?
- Their dashboard has support for sending SMS messages.
Does MicroPython in GPy have SMS messaging routines?
- I have found none in my search.
Has anyone ever gotten SMS messaging to work with GPy?
- I have found no indication of anyone receiving a SMS message with a GPy.
reidfo last edited by
I haven't tried yet, but also wondering about receiving SMS.