Is my GPY Bricked??
-
@stevo52 Do you have anything else connected to the Expansion Board, especially on port P8? Do you have an SD card inserted in the expansion board?
-
@xykon I eliminated that scenario early on, the problem is the same with or without the SD Card. I removed the GPY from the expansion board and put it in a proto board (tried 3 different ones - different brands) and tried connecting with a USB to UART TTL RS232 cable - wire ends. That removed the expansion board completely but still no go as far as flashing goes but I can talk to the GPY and upload code files OK.
Now registered on this forum as Steve Williams (due to an email address change) - stevo7452@gmail.com
-
@stevo52 Yes, from the distance, it sounds like a hardware problem with the board. Maybe a broken wire or a bad solder point at the P2 pin.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login