VS Code COM port setting ignored

[Paul Thornton]

Could you post both your global pymakr conf and the per project one if you have one so I can take a look. It should use what you've given it. Not just decide on one itself.

[ChangedDaily]

Hi, I should have included these first time:

pymakr.conf:

{
    "address": "COM10 (FTDI)",
    "username": "micro",
    "password": "python",
    "sync_folder": "",
    "open_on_start": true,
    "safe_boot_on_upload": true,
    "py_ignore": [],
    "fast_upload": false,
    "ctrl_c_on_connect" : true
}

pymakr.json (from All commands->Pymakr>Global settings):

{
	"address": "COM10 (FTDI)",
	"username": "micro",
	"password": "python",
	"sync_folder": "",
	"open_on_start": true,
	"safe_boot_on_upload": false,
	"py_ignore": [],
	"fast_upload": false,
	"sync_file_types": "py,txt,log,json,xml,html,js,css,mpy",
	"ctrl_c_on_connect": false,
	"sync_all_file_types": false,
	"auto_connect": true
}

Thanks

[Paul Thornton]

@changeddaily

Hello.

Please remove the (FTDI) parts and try again.
It only needs "COM10" :)

Should work after that.

Paul

[ChangedDaily]

Hi,

I've changed both settings as suggested but it still insists on going to COM3.

Patrick

[Milan]

@changeddaily I had similar issue with Atom, there is option that was checked to always select first COM port from list. It sound to me that VS Code is doing the same thing.

[combaindeft]

@changeddaily said in VS Code COM port setting ignored:

Hi,
I've changed both settings as suggested but it still insists on going to COM3.
Patrick

hmm ... I'm not really sure about how it works on Windows ... as on Mac / Linux we provide the full path to our "/dev/...."

here is a copy of my files:

pymakr.json [Global Settings]

{
	"address": "/dev/cu.usbmodem",
	"username": "micro",
	"password": "python",
	"sync_folder": "",
	"open_on_start": true,
	"statusbar_buttons": [
		"console",
		"run",
		"upload",
		"download",
		"status",
		"disconnect",
		"listserial",
		"projectsettings",
		"settings",
		"getversion",
		"getssid"
	],
	"sync_file_types": "py,txt,log,json,xml",
	"ctrl_c_on_connect": false,
	"safe_boot_on_upload": false,
	"sync_all_file_types": false,
	"auto_connect": false,
	"py_ignore": [],
	"fast_upload": false
}

pymakr.conf [Project Settings]

 {
    "address": "/dev/cu.usbmodemPy3434341",
    "username": "micro",
    "password": "python",
    "sync_folder": "",
    "open_on_start": true,
    "statusbar_buttons": [
        "status",
        "listserial",
        "settings",
        "projectsettings",
        "getversion",
        "getssid",
        "console",
        "run",
        "upload",
        "download",
        "connect",
        "disconnect"
    ],
    "sync_file_types": "py,txt,log,json,xml",
    "ctrl_c_on_connect": false
}

[Ralph]

@changeddaily You have auto_connect set to true in the global settings, which is why it connects to COM3. If autoconnect finds 2 potential pycom devices it just picks the first one in the list it gets back from the serial library.

[ChangedDaily]

@ralph Yes, I can confirm that changing to just "COM10" and setting auto connect to false fixes the issue. Perhaps some changes to the default settings or further explanation in the documentation would be helpful.

Thanks to all for suggestions.

[Ralph]

@changeddaily Good to hear. Yes I agree, our documentation could definitely use an update.

[chrisrei]

I also could not connect to my board and solved the problem as follows:

If your PC has Bluetooth, have you ever tried to turn off Bluetooth? On my PC, Bluetooth uses COM3. Pymark always tried to connect to COM3. After I turned off Bluetooth, I was able to connect to my Pycom board without any problems.

Once a connection to the board has been established, the board can also reconnect successfully with Bluetooth turned on.

I hope this information helps. (:

In my case COM3 is used by Bluetooth and Pymark tries to connect to COM3.

In this menu you can disable Bluetooth

Connection to the board has been established successfully: