Multi-role BLE Project

[gjhannam23]

Hi all,

Apologies I can't seem to post under Wireless tech... Not sure if anyone else has had this problem @administrators please could you move this post?

Anyway, I've been looking at building a prototype for a wearable tech project my team is working on.

I've been looking at building a prototype for a wearable tech project my team is working on.

I have the following requirements:

1. The ability to receive data from a smartphone
2. The ability to store a small amount of data on the device
3. The ability to send data from one device to another device
4. The ability to receive data from another device
5. The ability to send data to a smartphone

I wondered if there was anyone on here who have looked into multi-role BLE development on this platform similar to this https://www.cypress.com/documentation/code-examples/ce215555-ble-multi-role-psoc-6-ble

Thanks, Greg

[ryanjenson90]

This post is deleted!

[Eric73]

@gjhannam23 You forgot to say something about your power requierement, and for IoT it's something very important.
For doing something similar i will use BLE-Mesh, the device role will be "mesh gateway", with nrf52 chip power consumption will be around 6mA permanently.
Doing multirole (master and device/beacon) while have the same power consumption byt cost more ram in ble chip.