Universal IP67 Case - feedback

  • I have just received 2 pycom universal ip67 cases and they do look good.
    there are 2 things i do have issues with and i'm just providing it as feedback.

    1. There are no included screws for mounting the pysense, pytrack or expansion boards.
      I now need to try to find the correct screws to fix board to case.
      So far I haven't found any details on the correct size I should use

    2. The usage of the punch out holes is not overly obvious and with lack of any documentation i'm curious about their purpose.
      There are a number of punch out holes, some are obviously for antenna but others are not so obvious.
      The rectangular punch out I assume is for USB but not sure what to use here that will maintain IP67 rating

    Could we get some more information regarding this case?

  • @kodarn thanks for the info. I ended up not using the case as it wasn't very practical.
    I may come back to it later or just use something else but good to know what screws work

  • @dbrosy @shaunix I got a set of "DIN 7981" steel screws with dimensions 2.9 mm * 9.5 mm. They worked perfectly to mount the Expansion Board v3.1 to the Universal IP67 case.


  • I too am curious about the screw size. The holes are a lot smaller than I was expecting.

Log in to reply

Pycom on Twitter