Lopy/Pysense program going to sleep works perfectly on USB, not on Battery
-
We made a program on a Lopy with PySense and using the SD card, which goes to sleep at a cerain moment and is waken up by e.g. the acceloremeter.
It works prefectly when power supplied by USB (and battery),
but when working on battery alone it hangs after waking up.
The battery is fully charged (4.1 V, 4.2 V when charging).Any ideas? Known solutions?
-
@peterb Do you have the same issue if you don't use the SD card?
Are you using
machine.deepsleepor the Pysense library deep sleep? -
@jcaron We are using the pysense library for it.
It could have been the suggestion we read somewhere else on the forum for connecting P8 with a resistor to 3V3. If we remove the resistor it seems to work. More testing being done at the moment.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login