L01 Power regulator?
-
In the L01 datasheet there is this text block:
"The L01 features an on–board voltage regulator that takes 3.5V – 5.5V from the VIN pin and regulates it to 3.3V. It is important to only use the 3.3V as an output and not try to feed 3.3V into this pin as this could damage the regulator."
I think this is an copy/paste mistake... ? -
https://docs.pycom.io/.gitbook/assets/l01-pinout.pdf says:
3V3 pin: Supply with a stable 3V3 power source capable of delivering at least 650mA
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login