Modifying boot.py



  • Re: Import of variables from boot.py
    There is a small file system in the flash memory on the WiPy. This contains all the support code, the files run at boot time, and any code the user uploads to the board (unless you use an SD card, which I highly recommend).

    The boot sequence when you power on or reset the board is

    Power on
    Bring up the Python interpreter (REPL)
    Execute the boot.py program
    Execute the main.py program
    Start the telnet and ftp servers

    Regards,
    9Apps VidMate


Log in to reply
 

Pycom on Twitter