Two restarts on pin wake from deepsleep

[thinginnovations]

I'm deep sleeping a LoPy with the following:

    machine.pin_sleep_wakeup(['P8'], mode=machine.WAKEUP_ALL_LOW, enable_pull=True)
    # 2 minutes
    machine.deepsleep(120000)

But on wakeup via the pin P8 being taken low see this:

ets Jun  8 2016 00:22:57

rst:0x5 (DEEPSLEEP_RESET),boot:0x1f (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:1
load:0x3fff8028,len:8
load:0x3fff8030,len:2156
ho 0 tail 12 room 4
load:0x4009fa00,len:19208
entry 0x400a05f4
Initializing filesystem as FatFS!
LoRaWAN sensor node
Reset cause Deepsleep
Wake reason (1, [Pin('P8', mode=Pin.IN, pull=Pin.PULL_DOWN, alt=-1)])
Sleeping
ets Jun  8 2016 00:22:57

rst:0x5 (DEEPSLEEP_RESET),boot:0x1f (SPI_FAST_FLASH_BOOT)
ets Jun  8 2016 00:22:57

rst:0x10 (RTCWDT_RTC_RESET),boot:0x1f (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:1
load:0x3fff8028,len:8
load:0x3fff8030,len:2156
ho 0 tail 12 room 4
load:0x4009fa00,len:19208
entry 0x400a05f4
Initializing filesystem as FatFS!
LoRaWAN sensor node
Reset cause Power On
Wake reason (0, None)
Go back to sleep

It is waking correctly on the pin, sleeping and waking again immediately after sleeping.

Any ideas what is going wrong here?

Thanks

Andrew

[thinginnovations]

No ideas yet?