'LoRa' object has no attribute 'Mesh'
thibault last edited by
Hello, i made a new subject, but i think is following this subject: Pymesh updates
I have try to use the pymesh network for see how to use it. I have upgrade a lopy4 with the 1.20.0.rc12:
rst:0x7 (TG0WDT_SYS_RESET),boot:0x12 (SPI_FAST_FLASH_BOOT) configsip: 0, SPIWP:0xee clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00 mode:DIO, clock div:1 load:0x3fff8028,len:8 load:0x3fff8030,len:2156 ho 0 tail 12 room 4 load:0x4009fa00,len:19208 entry 0x400a05f4 Initializing filesystem as FatFS! Traceback (most recent call last): File "main.py", line 336, in <module> File "mesh_interface.py", line 36, in __init__ File "mesh_internal.py", line 105, in __init__ File "loramesh.py", line 61, in __init__ AttributeError: 'LoRa' object has no attribute 'Mesh' Pycom MicroPython 1.20.0.rc12 [v1.9.4-81167ed] on 2019-07-15; LoPy4 with ESP32 Type "help()" for more information. >>>
I have get the software in this page: https://software.pycom.io/downloads/LoPy4.html
Maybe the LoRa object with Mesh attribute was on other folder?
Can someone explain me my error? Thank's
catalin last edited by
Pymesh (Mesh subclass of Lora) was excluded from build rc12. There are some licensing issues which we are trying to solve.
Most likely, next week, I'll make a separate pymesh firmware binary release (just latest RC+pymesh module).
As a temporary workaround, some older releases can be used, 1.20.0.rc8-9-10.
angie92v last edited by
I had the same problem, to fix it put the version 1.20.0.rc11 and now i don't have that error but the mesh doesn't detect any neighbor and don't know how fix that