LoPy4 can not connect to Pybytes. Exception: Board not detected: I2C bus error
-
Hi, Its seams that the board connects, but I get an error Exception: Board not detected: I2C bus error, so I can not connect to the board through Pybytes.
ets Jun 8 2016 00:22:57
rst:0x1 (POWERON_RESET),boot:0x12 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:1
load:0x3fff8028,len:8
load:0x3fff8030,len:1688
load:0x4009fa00,len:0
load:0x4009fa00,len:14592
entry 0x400a059c
WMAC: 30AEA4EC88DC
Firmware: 1.18.2.r6
Pybytes: 0.9.12
Pybytes configuration read from /flash/pybytes_config.json
Initialized watchdog for WiFi and LTE connection with timeout 660000 ms
WiFi connection established
WARNING: consider enabling TLS by using pybytes.enable_ssl()
Connected to MQTT mqtt.pybytes.pycom.io
Pybytes connected successfully (using the built-in pybytes library)
Now starting user code in main.py
Traceback (most recent call last):
File "main.py", line 37, in <module>
File "/flash/lib/pysense.py", line 18, in init
File "/flash/lib/pycoproc.py", line 103, in init
File "/flash/lib/pycoproc.py", line 103, in init
Exception: Board not detected: I2C bus error
Pycom MicroPython 1.18.2.r6 [v1.8.6-849-a210e85] on 2019-05-13; LoPy4 with ESP32
Type "help()" for more information. -
@iarakis said in LoPy4 can not connect to Pybytes. Exception: Board not detected: I2C bus error:
Exception: Board not detected: I2C bus error
The previous one is if I connect my LoPy4 to Makr board. If I connect to the Pysense board, I get the following:
ets Jun 8 2016 00:22:57
rst:0x1 (POWERON_RESET),boot:0x16 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:1
load:0x3fff8028,len:8
load:0x3fff8030,len:1688
load:0x4009fa00,len:0
load:0x4009fa00,len:14592
entry 0x400a059c
WMAC: 30AEA4EC88DC
Firmware: 1.18.2.r6
Pybytes: 0.9.12
Pybytes configuration read from /flash/pybytes_config.json
Initialized watchdog for WiFi and LTE connection with timeout 660000 ms
WiFi connection established
WARNING: consider enabling TLS by using pybytes.enable_ssl()
Connected to MQTT mqtt.pybytes.pycom.io
Pybytes connected successfully (using the built-in pybytes library)
Now starting user code in main.py
Connected to Wifi
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login