Multiple SPI devices WiPy 3.0
-
Hi!
On my project I want to use TFT, SD adapter and camera using SPI. I've seen something about Slave Select, but I'm not sure how to properly connect and use it on breadboard.
Have someone done it before? Only one external device will be used at same time. -
@EngeenerAtendee Each device should have a CS input, which must be pulled low to activate it. You can share SCLK, MOSI and MISO for all three devices, and have to pull CS low for the one that is to be used. So you need 6 GPIO ports.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login