Would this mesh network run on LoPy?
-
I'm interested in this project https://github.com/sudomesh/disaster-radio
It runs well enough on the TTGO LoRa board, but it has no CE marking.
Would it work on LoPy?
Does anyone with a spare device fancy giving it a go?
-
Or does anyone fancy porting this to micropython
https://github.com/sudomesh/disaster-radio/wiki/Protocol#addressing
https://github.com/sudomesh/LoRaLayer2So you could have interoperation between the nodes.
-
hi @sam_uk, it seems interesting, thanks for posting it!
It's bit more light-weight than Thread/Zigbee.
I couldn't understood whats the actual status, it's done, it is open-source, what about Intellectual Property of the protocol? -
@catalin Yes it's an open source project that is working, at the moment only on boards without CE/ FCC approval, which is why it would be interesting to get it on the Lopy.
"All files in this repository are dual-licensed under both GPLv3 and AGPLv3" at the bottom of: https://github.com/sudomesh/LoRaLayer2
-
This post is deleted!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login