Advice on SDI over WiPy project
-
Hi guys, I'm trying to make sdi transceiver module using these sdi fiber extenders , lets say I have SFP module and read sdi stream into memory buffer or array of files, then I would like to send it further with WiPy, will it work with uncompressed sdi streams 500-1500Mbps? If yes, could you please recommend me any related articles/topics with similar applications? I appreciate your help guys, thank you!
-
That's WAY above what the WiPy can do, those rates are FPGA territory not microcontroller stuff. I think the maximum the ESP32 can do is 10Mbps on the Ethernet port.
If you want to stay within Python you could try the PYNQ-Z1 which has a Xilinx Zynq FPGA and ARM combo: http://www.pynq.io
But be warned that even with Python it's quite a learning curve.
-
Thank you for advice! I would probably use Verilog then.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login