Wake up on trigger
-
Hi, Using one of the Pins to wake up from sleep on the GPY. It sort of works, and sort of does not. If the trigger switches from 0 to 1, the module wakes up, initiates LTE and transmits the status. That´s all good. But, if for some reason we release the trigger from 1 to 0 after wakeup, but before the device is attached to LTE, the device reboots itself. If we do the same thing once the device is attached, all works as it should. Any ideas?
-
@Don-iot which pin are you using? Did you make sure that pin isn’t use for some other purpose?
-
Hi, we have tried with P14/P16. The change of pin wakes up the device and the only thing we use that PIN for is to read the status if it is 1 or 0.
-
When we tested another unit, the problem is gone…
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login