pybytes deepsleep



  • Hi all,

    I've run into an issue using pybytes on my LoPy4 with Pysense shield.
    I would like to get data from sensors, send them to Pybytes and go to deepsleep.
    I do have sepadate funcions to get the data from sensors and to send the data.
    Simplified code without any definitions and library imports:

    sensorData = getSensorData()
    sendData(sensorData)
    py.setup_sleep(sleepTime)
    py.go_to_sleep()
    

    The getSensorData() returns JSON dictionary with all the sensor data.
    The sendData() looks like this:

    def sendData(data):
        pybytes.send_signal(1, data['batt'])
        pybytes.send_signal(2, data['temp1'])
        pybytes.send_signal(3, data['press'])
        .
        .
    

    (two dots represent more lines in the function, 9 values are being sent, wanted to save some space :) )
    The problem is that calling sendData() jumps out immediately and the actual data sending process takes on later. From what I understand pybytes.send_signal() sets up a new thread with given arguments and is done.

    So when I run the code, LoPy goes to deepsleep before it actually sends out any data to Pybytes.

    Is there any flag or variable I could check to see if my Lopy board is still sending out the data and in that case wait before going to deepsleep??

    Something like:

    sensorData = getSensorData()
    sendData(sensorData)
    while(True):
        if not "pybytes_still_sending_data":
            py.setup_sleep(sleepTime)
            py.go_to_sleep()
    

    Possible workaround may be to put time.sleep() for like 20 sec before the deepsleep, but I would like to avoid this "solution".

    Thank you,
    j_mor



  • I have hit this too. Maybe an optional callback parameter to send_signal which gets executed when done?


  • Global Moderator

    Hi,
    Ill put this on the feature list!
    Gijs



  • @j_mor

    I had like to know the answer to this too.



  • Would love to know this as well, or if there's any way to get confirmation that a message/signal was sent (with_ack)?


Log in to reply
 

Pycom on Twitter