Lopy to Dragino-LG01

[skycoyotte]

Hello
I would like to send data to my Dragino-LG01 Lora gateway. I found the pycom-loramac example in the library, but it doesn't do the trick. My setup is Lopy4/Pytrack-Pysense and Dragino LG01 Gateway. Is there anybody who can help me or show me the way ? Thanks in advance

[thinginnovations]

Pygate shipping? Really?

[Gijs]

Just so you know: if you are looking to upgrade your gateway, currently we are shipping the Pygate board: https://pycom.io/product/pygate/ that supports 8 channels ;)

Best

[skycoyotte]

@robert-hh thanks for your response :)
Frequency and Spreading factor was the keys parameters

have a nice day

[robert-hh]

@skycoyotte said in Lopy to Dragino-LG01:

Dragino-LG01

This is a single channel device.- You have to take care that the LoPy4 and the gateway are configured to the same Frequency and Spreading factor, and that they stay at that frequency.

Personal note: Single channel gateways are pretty limited. For public domain networks like TTN they should not be used, because they would be able only to receive a small fraction of the potential messages. And that's against the attitude of such a community project. For a private application it is fine.

[skycoyotte]

nobody ? :(