LOPY4 Switch to 433MHZ on LORAWAN
-
Hi
I can't find any example code on for the Lopy4 switching to 433 MHZ Europe low frequency band. Also the documentation does not specify the correct constructor for the 433 freqency. Anyone with some experience?
-
@momo232030 433MHz is not supported by the Firmware. I made versions for that, but did not update them continously. The most recent Version is here . https://github.com/robert-hh/Shared-Stuff
-
@momo232030 Looking into the code, you should be able to select EU868 as region and set the frequency to 433MHz.
-
Hi thanks for your quick answer. Pycom supports the 433MHz freqency now on the official firmware
look at this tweet for reference.
So
lora = LoRa(mode=LoRa.LORAWAN, region=LoRa.EU433)
is supported right nowhttps://twitter.com/Norant_/status/1275807351442997249/retweets/with_comments
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login