Upgrade Pygate firmware

[papasmurph]

Update: I collected the findings to a single post.

I just got a Pygate with a WiPy as "host".

The tutorial page at https://development.pycom.io/tutorials/all/pygate/ says "Flash the Pycom Device with a firmware build where Pygate functionality is enabled."

I used the tool at https://docs.pycom.io/gettingstarted/installation/firmwaretool/ and upgraded using "pygate" and "pybytes".

"pygate" caused the WiPy to not start at all.

"pybytes" restored the function to what it was before (seemingly).

I installed the Pygate tutorial example as-is, except for fixing the indentations and changing the WiFi configuration and also adapted config.json to my needs.

Both before and after upgrade I get "AttributeError: 'module' object has no attribute 'callback'" for machine.callback, so it seems Pygate functionality is still not there.

Is there anything else I should do?

Thanks in advance.

[bgeorges]

@papasmurph I just ran into the same issue even though I checked the "include development Software" and I had the boards (patate and WiPy) already setup and running before I did the upgrade. I tried to clear the user space as well and go through a clean build but still stuck. I am stuck with the same error :

Starting LoRaWAN concentrator
Traceback (most recent call last):
  File "main.py", line 26, in <module>
AttributeError: 'module' object has no attribute 'callback'
Pycom MicroPython 1.20.2.r0 [v1.11-783192e] on 2020-08-06; WiPy with ESP32
Pybytes Version: 1.5.1

Anyone faced this issue ?

[papasmurph]

This was solved by checking "Include development software".

Also, I thought the WiPy3 supported 5 GHz. That's not mentioned on the product page.

Now I have data arriving at TTN via WiFi.

[papasmurph]

This post is deleted!

[papasmurph]

This post is deleted!