LoRa nano gateway slower throughput
-
I am using lorawan nano gateway example, where 1st lopy4 is programmed as a nano gateway and 2nd device as node via ABP.
I am trying to send 50 packets of 50 bytes.
These packets are received by the gateway at every 3 seconds interval because of that I am getting only 16.6 Bytes/s throughput.How can I get maximum possible throughput using SF7, BW125, CODING_4_5, Region=IN865, mode= lorawan....?
-
@Bhavit I would assume that the speed is limited by the node, not the gateway. The node cannot send packets faster than once per about 2 seconds in LoRaWAN mode A. After sending a packet, if wait two seconds for possible downlink messages.
-
@robert-hh So if I'll program that node as Class C then is it possible that I can get better throughput ?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login