WiPy 2.0 Bricked
-
Re: WiPy 2.0 Firmware update - bricked and recovered
I got this error:
rst:0x10 (RTCWDT_RTC_RESET),boot:0x2b (HSPI_FLASH_BOOT)
flash read err, 1000
Falling back to built-in command interpreter.
OKTried to use command line like in the referenced post. I get:
$ python bin/updater.py --port /dev/ttyS30 --file firmware/1.5.0.b2-WiPy.tar.gz
Namespace(file='firmware/1.5.0.b2-WiPy.tar.gz', port='/dev/ttyS30', speed=115200, tar=None)
Connecting...
Exception: Failed to connect to ESP32: Timed out waiting for packet header, on line 128When I remove the wire from program to gnd and reboot, the previous firmware is still there, so I am stumped for the moment.
-
Ok. So it's not bricked. But, I'm having troubles updating the firmware.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login