Flashing esp-idf project : no output on monitor
-
Hello,
I have made a project for the wrover esp32 board, and would like to port it to the pycom gpy(I have the extension board v3.1) . I read that to be able to do that, i just had to make a connection between p2 and gnd, so that's what i did. I am trying with the hello-word example from the esp-idf directory. The program seems to be flashed, but then the monitor starts and there is no output at all. I set the baudrate to 115200. Could you help me ?~/esp/esp-idf/examples/get-started/hello_world$ make flash monitor Toolchain path: /home/user/.espressif/tools/xtensa-esp32-elf/esp-2019r2-8.2.0/xtensa-esp32-elf/bin/xtensa-esp32-elf-gcc Toolchain version: esp-2019r2 Compiler version: 8.2.0 Python requirements from /home/user/esp/esp-idf/requirements.txt are satisfied. App "hello-world" version: v4.0.1-dirty Flashing binaries to serial port /dev/ttyACM0 (app at offset 0x10000)... esptool.py v2.8 Serial port /dev/ttyACM0 Connecting..... Chip is ESP32D0WDQ6 (revision 1) Features: WiFi, BT, Dual Core, 240MHz, VRef calibration in efuse, Coding Scheme None Crystal is 40MHz MAC: 80:7d:3a:94:7a:cc Uploading stub... Running stub... Stub running... Configuring flash size... Auto-detected Flash size: 8MB Compressed 26000 bytes to 15512... Wrote 26000 bytes (15512 compressed) at 0x00001000 in 1.4 seconds (effective 151.7 kbit/s)... Hash of data verified. Compressed 150880 bytes to 77721... Wrote 150880 bytes (77721 compressed) at 0x00010000 in 6.9 seconds (effective 175.6 kbit/s)... Hash of data verified. Compressed 3072 bytes to 104... Wrote 3072 bytes (104 compressed) at 0x00008000 in 0.0 seconds (effective 1294.4 kbit/s)... Hash of data verified. Leaving... Hard resetting via RTS pin... MONITOR --- idf_monitor on /dev/ttyACM0 115200 --- --- Quit: Ctrl+] | Menu: Ctrl+T | Help: Ctrl+T followed by Ctrl+H --- -
My bad, apparently I messed up the flashing process: in order to flash an esp-idf project, one must make flash with the strap, then remove the strap, push reset next to the led, then make monitor, and a keystroke to make it appear on the screen.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login