Pygate packet forwarder ERROR

[Charles Westhoff]

Hi,

I'm installing a Pygate/Gpy, firmware 1.20.2.RC10 and registered it at TTN. Apparently it got a connection, but it was last seen 11 days ago. I'm not using the LTE part for coms, only WLAN.

(sysname='GPy', nodename='GPy', release='1.20.2.rc10', version='v1.11-b2436d4 on 2020-07-01', machine='GPy with ESP32', pybytes='1.5.0', pygate='1.0.1')

main.py

from network import WLAN
import time
import machine
from machine import RTC
import pycom

pycom.heartbeat(False)

def machine_cb (arg):
evt = machine.events()
if (evt & machine.PYGATE_START_EVT):
pycom.rgbled(0x103300)
elif (evt & machine.PYGATE_ERROR_EVT):
pycom.rgbled(0x331000)
elif (evt & machine.PYGATE_STOP_EVT):
pycom.rgbled(0x000000)

machine.callback(trigger = (machine.PYGATE_START_EVT | machine.PYGATE_STOP_EVT | machine.PYGATE_ERROR_EVT), handler=machine_cb)

wlan = WLAN(mode=WLAN.STA)
wlan.connect(ssid='xxxxxx', auth=(WLAN.WPA2, "xxxxxx"))

while not wlan.isconnected():
time.sleep(1)

print("Wifi Connection established")

rtc = RTC()
rtc.ntp_sync(server="0.pool.ntp.org")

fp = open('/flash/config.json','r')
buf = fp.read()

machine.pygate_init(buf)

Atom Console after firing up:

...
...
Info: Initialising AGC firmware...
Info: putting back original RADIO_SELECT value
[106664084] lorapf: INFO_ [main] concentrator started, packet can now be received
[106664085] lorapf: INFO_ [up ] start
[106664086] lorapf: ERROR [main] impossible to create Timer Sync thread (12) (34) (11,22,1)
[106664086] lorapf: INFO_ [down] start
[106664087] lorapf: INFO_ [jit ] start
[106664101] lorapf: INFO_ [down] End of downstream thread
[106664104] lorapf: INFO_ [jit ] end
[106664138] lorapf: INFO_ [up ] End of upstream thread
[106664138] lorapf: INFO_ [main] Stopping concentrator

The End

Then the LED goes RED.
When looking at other Pygate issues I don't see ERROR's in the packet forwarder.

Please advice, what is happening here ?

[peterp]

for anybody else running into this - pretty sure it's about the memory consumption as explained here: https://docs.pycom.io/tutorials/expansionboards/pygate/#setup

[Christoph Molitor]

@Gijs Thanks!! This solved my problem!

[Charles Westhoff]

Hi Gijs,

Thanks, that did the trick. I've used the GPy for earlier projects, so maybe that was messing up the installation. Maybe a good idea to add these advanced settings to the instructions.

The LED is GREEN now. Thanks Gijs

[Gijs]

Hi,
Ive seen this issue before.. It was cleared after I reflashed my GPy and clearing the 'CONFIG', 'NVS' and partitions (and I clicked 'erase during update' as well) in the Pycom Firmware update tool. I believe it has to do with using other timers in previous configurations

The error line is here:

[106664086] lorapf: ERROR [main] impossible to create Timer Sync thread (12) (34) (11,22,1)

Let me know if that worked for you!