Lopy 4 resets after sometime and looses the code
-
I am using Lopy 4 with firmware v1.18.3 to read the generator status and fuel level. The challenge that I am facing is that it resets and looses the code after sometime. How to i get over this issue?
-
@Andy12 First step is upgrading the firmware.
-
What is the stable version that i should upgrade to?
-
@Andy12 I run 1.20.2rc11 reliably, but that is my own built without pybytes. If you do not want to use pybytes, use the most recent legacy version. A update package for LoPy4 with my build is here: https://github.com/robert-hh/Shared-Stuff/blob/master/LoPy4-1.20.2.rc11.tar.gz
-
You can upgrade to 1.20.2.r1 using the firmware updater and disable pybytes if you wish, by using
import pycom pycom.pybytes_on_boot(False)Gijs
-
@robert-hh The link is not working.
-
@Andy12 I update the firmware from time to time. The actual version is: https://github.com/robert-hh/Shared-Stuff/blob/master/LoPy4-1.20.2.r4.tar.gz
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login