Windows WiFi immediately disconnecting
-
I have started setting up my LoPy module on the expansion board and followed the getting started. I have updated to the latest firmware.
On my windows 10 machine (Dell XPS) I can see the LoPy WiFi SSID (lopy-wlan-b7e0), after selecting it and entering the password
www.pycom.ioit tries to connects and then states that the connection has been unsuccessful.Viewing the console in Pymakr when the connection takes place I see the following:
It seems to join then immediately leave ...?
If I connect my iPad or Android phone they remain connected, but using a browser and going to
192.168.4.1comes up with a server not found error.Any Thoughts?
-
@pform
this password is for what?
normally for e.g. ftp it is:user: micro passowrd: python -
www.pycom.io is the password for connecting to the modules Wifi ...
-
@pform
ok - then it looks good
but current firmware is not stable for me in wifi AP
previous 1.5.0 was ok -
@pform said in Windows WiFi immediately disconnecting:
If I connect my iPad or Android phone they remain connected, but using a browser and going to 192.168.4.1 comes up with a server not found error.
This is normal, the Pycom boards don't run web server by default, so 192.168.4.1 is only accessible by FTP or Telnet
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login