nils köster last edited by
i'm switching from a raspberry+lte based device to a gpy based and I'm stil learning.
I need to control a switch with the GPY when the GPY get's triggered via LTE. SMS is also an option.
I assume that the LTE_WAKE Pin is for bringing the device (gpy+lte) to a deepsleep and wake it up in case there's lte activity.
There's no documentation (I found) and not solutions in this forum, yet.
Has anyone used the LTE_WAKE Pin successfully and can confirm that it's usable like I described it?
Thanks a lot and best,
LTE_WAKE seems to be a hardware provision for pycom processor wakeup from some event in the lte modem but I've never seen it implemented.