upload problem

[robert-hh]

@kjm You can always use a tool like putty with screen log enabled, or on Linux picocom, pipe'd with tee in a file, and log the screen output to a file.
When using my image, there should the module upysh be embedded. start it with:

from upysh import *
cat("name of the logile")

That will print the content of the logfile. Still ftp should work.

I have here an alternative ftp server, https://github.com/robert-hh/FTP-Server-for-ESP8266-ESP32-and-PYBD/blob/master/ftp_pycom.py
It starts an ftp server on port 5024. That one will also work with Windows command line ftp. Since it runs on the pycom device in foreground, you have to terminate it with Ctrl-C.

[kjm]

@robert-hh said in upload problem:

from upysh import *

The cat is a nice feature Rob. Do you have anything in your image that shows file size as easily?

[robert-hh]

@kjm after importing * from upysh, there is a command 'man' to list all commands, there is 'ls' or 'ls (name)' to list files, and a few more unix shell like commands.

[kjm]

@robert-hh

>>> ls('lib')
   7621 onewire.py

4,056k free

awesome!

[kjm]

@robert-hh I tried to use that editor in your build

upysh is intended to be imported using:
from upysh import *

To see this help text again, type "man".

upysh commands:
pwd, cd("new_dir"), ls, ls(...), head(...), cat(...), hd(...)
newfile(...), mv("old", "new"), rm(...), mkdir(...), rmdir(...)
clear

   <dir> cert
   <dir> lib
   <dir> sys
      29 boot.py
      34 main.py
     262 project.pymakr

4,056k free

>>> from pye_mp import pye
>>> pye('main.py')

but the prompt vanishes after the pye('main.py') line. Should it work OK in Atom like upysh? If so can you see what I'm doing wrong?

[robert-hh]

@kjm The editor requires a terminal with vt100 support. The terminal window of pymakr may not be suitable for that. Try applications like Putty on Windows, screen or picocom on OS X or picocom or tio on Linux.

The documentation is in the repository: https://github.com/robert-hh/Micropython-Editor

[kjm]

@robert-hh huh?

[robert-hh]

@kjm Updated, see below. Just a glitch in the browser.

[kjm]

@robert-hh So if I can find the right terminal environment

from pye_mp import pye; pye('main.py')

should work?

[robert-hh]

@kjm Yes. On Windows, teraterm is also a good choice.

[kjm]

@robert-hh Some rubbish characters

dtl¬ðûZÓëBg

in TeraTerm VT when I press the reset button on the GPY but it's a start I guess.

[robert-hh]

@kjm You have to configure the UART port to 115200 baud 8N1. But rubbish on start after reset is normal. You should get a good prompt after that.

[kjm]

@robert-hh Nice & it's got a scroll slider which is more than I can say for pymakr.