Reset Lopy4 to fabric values
-
Hello, I'm using the lopy4 with a datalogger (I don't know if matters, but I comunicate with it using P3 and P4, serial com), batteries and solar panels.
And it's happening something weird. Sometimes the lopy stops, if we look at the console it appears
>>, and if we look at the wifi networks, its wifi appears with the factory name. That is, it appears that the microcontroller is resetting to the factory state.I think the problem is mine and it should be caused by a power surge or something similar. Could this be possible? In the documentation I do not find that this is possible, but it is to rule out possible causes of the error.
I know the question is pretty generic, but do you have any idea why this happens?
Thank you!
-
@M-m I've found the LOPY4s more sensitive to power cable length than GPYs. I can run GPYs on a dev board powered from a cheapie (minimum copper)1m long usb cable no problems, but with a LOPY4 I need to have a lipo plugged into the dev board to prevent random resets. It's maybe something to do with the different radios?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login