GPy IP Address
-
Dear Pycom,
I am new to GPy and LTE.
Can I ask how to print out the IP address obtained from LTE network service provider?
LTE example works fine for me.
Thanks for your help.
Cheers,
Paul -
Good to hear you're able to connect to LTE without any issues,
You should be able to get the IP address using an AT command like so:lte.send_at_cmd('AT+CIFSR')After you attached, but before connecting
-
@Gijs said in GPy IP Address:
'AT+CIFSR'
I'm not sure cifsr works on the sequans, maybe try 'AT+CGCONTRDP' to get the local IP
-
Thanks a lot.
print(lte.send_at_cmd('AT+CGCONTRDP')) works!
It gives
+CGCONTRDP: 1,5,"telstra.internet.xxx.yyy.gprs","10.247.zz.gg.255.255.255.255","","10.4.hh.ii","10.5.jjj.kk","",""10.247.zz.gg is the local ip address. Sad it is not public ip.
Cheers,
Paul
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login