[SOLVED] WiPy 2.0 on Pybytes?
-
Will WiPy 2.0 work with provisioning, installing code, firmware updates, all that? I don't yet have a 3.0.
And I can't access my 2.0 for a few days, hence I am asking instead of trying it. As soon as I get an answer I'll either buy a 3.0 immediately or just wait til I get my 2.0 in hand.
-
Main concern is the constrained RAM and flash space for the partitions. Since the LoPy and SiPy are supported, and they have 512KB/4MB, I feel comfortable that my WiPy 2.0 with 512KB/4MB will work.
If anyone tells me differently in the next few days though I will place the order.
-
I believe the Wipy 2.0 should still be compatible with Pybytes. Im not sure if it will run the latest stable firmware (1.20.2.r4) reliably and allow for a lot of micropython code, because the firmware size increased somewhat since the Wipy 2 was released, but you should be able to make it work with an earlier release if the latest does not work in your application
-
@Gijs said in WiPy 2.0 on Pybytes?:
I believe the Wipy 2.0 should still be compatible with Pybytes. Im not sure if it will run the latest stable firmware (1.20.2.r4) reliably and allow for a lot of micropython code, because the firmware size increased somewhat since the Wipy 2 was released, but you should be able to make it work with an earlier release if the latest does not work in your application
Well it boots up on 1.20.2.r4, but as soon as I try to initialize the WiFi I get a guru meditation. Will try an older version.
rst:0x10 (RTCWDT_RTC_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT) configsip: 0, SPIWP:0xee clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00 mode:DIO, clock div:1 load:0x3fff8020,len:8 load:0x3fff8028,len:2128 load:0x4009fa00,len:19760 entry 0x400a05bc WMAC: 240AC400B1B6 Firmware: 1.20.2.r4 Pybytes: 1.6.1 Initialized watchdog for WiFi and LTE connection with timeout 1260000 ms WiFi connection established Connected to MQTT mqtt.pybytes.pycom.io Pybytes connected successfully (using the built-in pybytes library) Pybytes configuration read from /flash/pybytes_config.json Pycom MicroPython 1.20.2.r4 [v1.11-ffb0e1c] on 2021-01-12; WiPy with ESP32 Pybytes Version: 1.6.1 Type "help()" for more information. >>> print('Hello world') Hello world >>> -
Problem was I wasn't using 5V on VCC and the guru meditation was coming from not having enough power.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login