LoPy 1: Module to Module example not working
-
Trying to get the simple Module to Module example ( https://docs.pycom.io/tutorials/networks/lora/module-module/ ) working - Node B isn't receiving any messages. Node A is executing the loop (as evidenced by the output of the print commands). The two nodes are in the same room, and both have the antennas connected.
Both running fw 1.20.2.r4Is there anything that may need to be changed in the code, to allow it to work with the current firmware? If it matters, I have set the region to AU915 on both.
-
FYI the Lora-MAC version here https://docs.pycom.io/tutorials/networks/lora/lora-mac/ actually is working (hooray! 😀 )
-
And.......WOW!!!!!! It's working from my apartment, to an UNDERGROUND garage about 100m away, and down one level. I am absolutely STOKED!!! It's blasting through ALL MANNER of stuff.
-
Just btw, I got the Module to Module example to work by changing the socket calls in the Node A code to blocking - looks like it's a timing issue.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login