New firmware release 1.6.7.b1 (LoRaWAN Nano Gateway with TTN example!!)

[jomifo]

I have successfully used the nanogateway example code to push some temperature sensor data (MCP9808) to TTN and am happy about that. Now I'm wondering are there ways using this example to configure LoRa to increase the range? I see the LORA_GW_DR = "SF7BW125" property in the config, but am unsure how or if this can be used to tweak Lora.
Thanks.

[daniel]

@jomifo yes, if you change the spreading factor to 12 ("SF12BW125") the range will be much better. Do this both on the nano-gateway and in the node. You also need to tweak the Join command like this:

lora.join(activation, auth, * ,timeout=None, dr=None)

Specify the dr and make it 0 (which is the same as SF12BW125).

Cheers,
Daniel

[jomifo]

@daniel Excellent! Seems no need to directly alter the join command since the 'dr' parameter also uses a config parameter, 'LORA_NODE_DR'. I'm looking at the latest example on Github.

[fredg]

I'm coming from this tutorial: https://docs.pycom.io/chapter/tutorials/lopy/lorawan-nano-gateway.html

You should update it probably to mention the "I'm using the legacy packet forwarder" for TTN network, and update the code to make it easy to extract the GATEWAY_ID.
Or maybe update the code to allow any GATEWAY_ID for TTN? I'm not sure how it really works...

[jmarcelino]

@fredg
Thank you very much for your suggestion, TTN changed their language and gateway registration process recently - we'll update our documentation to reflect this.

[jmarcelino]

@fredg
I've updated the Nano-gateway documentation to show how to generate a Gateway ID and also to reflect the changes in the TTN interface: https://docs.pycom.io/chapter/tutorials/lopy/lorawan-nano-gateway.html

Thanks again for your suggestion!

[Devang Sharma]

@daniel, I live in India. While registering the gateway, which frequency plan I should choose? Can I choose Europe or do I have to choose Asia?

Thanks.

[jmarcelino]

@devang-sharma
India has a unique Frequency plan:

https://kotahi.net/network/frequencies/

I recommend setting your config.py for the nano gateway and nodes to

LORA_FREQUENCY = 865062500

and make sure your nodes use this 865062500 frequency as well:

# set the 3 default channels to the same frequency
lora.add_channel(0, frequency=config.LORA_FREQUENCY, dr_min=0, dr_max=5)
lora.add_channel(1, frequency=config.LORA_FREQUENCY, dr_min=0, dr_max=5)
lora.add_channel(2, frequency=config.LORA_FREQUENCY, dr_min=0, dr_max=5)

[Devang Sharma]

@jmarcelino, thanks. I've sent them an e-mail in order to get a free network connection. I hope they'll reply soon.

[Devang Sharma]

@jmarcelino, KotahiNet does not provide free connectivity in India. Also, they provide private LoRaWAN network only to the larger companies.

Is it possible to connect one LoPy(acting as a node) to connect with another LoPy(acting as a Gateway) without such LoRaWAN network?

If yes, can you guide me how to achieve it?
My question might not seem a good one, but I'm really new to LoRa.

Thanks.

[livius]

@devang-sharma said in New firmware release 1.6.7.b1 (LoRaWAN Nano Gateway with TTN example!!):
look at examples
in doc
https://docs.pycom.io/chapter/tutorials/lopy/lopy-lopy.html
and sources on git
https://github.com/pycom/pycom-libraries/tree/master/examples

[Devang Sharma]

@livius Thanks. I was looking into docs and I found the examples. Though they needed modifications, it worked perfectly.

[rvandam]

I have a setup with a node and a nano gateway with the latest default script from Github. The data is received in the TTN backend, so that part is working.

I want to update the date and time on the nodes over Lora (no wifi) I discovered that no rx data is received on the node. Could you give me a hint how to configure the gateway to send back the current time to the node?

[jmarcelino]

@rvandam
In LoRaWAN with TTN (Class A) you must send data from the node in order to receive any messages back.

But if you queue a downlink with TTN you should receive it in your node - for example with data = s.recv(64) - once you've done an uplink (an s.send(...) ).

[rvandam]

@jmarcelino thank you for your reply!

When I add some data in the downlink field in the TTN backend, this data is received by the node. This is already one more step forward :-)

Should I see the gateway as a "dumb" packet forwarder, and do the logic on the node and the TTN side?

[jmarcelino]

@rvandam
Glad you managed to receive data.

Yes, that's exactly what LoRaWAN gateways are :) They don't send or receive anything on their own, that's the job for the network server.

[rvandam]

@jmarcelino thank you again. This makes much sense. I was looking on the wrong end.

[Vicky_]

@jmarcelino I live in Malaysia. May i know what frequency should i use? i have tried to search but i couldn't find.

Thanks.

[jmarcelino]

@vicky_

Malaysia uses the AS923 plan:

https://www.thethingsnetwork.org/wiki/LoRaWAN/Frequencies/Frequency-Plans#lorawan-frequencies_as923

[bilou7]

Hello Daniel,

Did you add the functionality : "Ability to receive packets sent on any spreading factor" to the lopy gateway ?

Thanks in advance