Send data requests http post. **SOLVED**

[livius]

@scg94
try first on e.g.
https://requestb.in

create bin and put url

>>> urlpost.request("POST", "http://requestb.in/1kley5v1", '{"temperatura_rpi":' + str(500)+'}').text
'ok'
>>> 

FORM/POST PARAMETERS

None
HEADERS

Host: requestb.in
X-Request-Id: b5ff3790-7279-4a4a-8237-b91ac4f26221
Cf-Ipcountry: PL
Cf-Ray: 34d8ea4990e56b01-WAW
Via: 1.1 vegur
Connection: close
Total-Route-Time: 0
Content-Length: 23
Cf-Visitor: {"scheme":"http"}
Cf-Connecting-Ip: XXXX
Connect-Time: 10
Accept-Encoding: gzip
RAW BODY

{"temperatura_rpi":500}

[scg94]

@livius
Brother, I just saw the error more clearly...

>>> urequest.request("POST","http://50.23.124.68/api/v1.6/devices/raspberry-pi?token=private",'{"temperatura_rpi":'+str(500)+'}').text
'{"detail": "Unsupported media type \'\' in request."}'

What is it????

I did the same as you and this was the result:

>>> urequest.request("POST", "http://requestb.in/1kley5v1", '{"temperatura_rpi":' + str(500)+'}').text
'ok'
>>> urequest.request("POST", "http://requestb.in/1kley5v1", '{"temperatura_rpi":500}').text
'ok'

[livius]

@scg94
I do not know which media type is supported on your site but
try to add parameter

urequest.request("POST","http://50.23.124.68/api/v1.6/devices/raspberry-pi?token=private",'{"temperatura_rpi":'+str(500)+'}', {"Content-Type": "text/plain"}).text

[scg94]

@livius Hiiiii,

Yes, that's right, the header is {Content-Type: application / json}. Unfortunately I get error, and this is where everything gets complicated again ...

>>> urequest.request("POST","http://50.23.124.68/api/v1.6/devices/raspberry-pi?token=private",'{"temperatura_rpi":'+str(500)+'}',{"Content-Type":"application/json"}).text
Traceback (most recent call last):
  File "<stdin>", line 1, in <module>
  File "/flash/lib/urequest.py", line 67, in request
AssertionError: 
>>> urequest.request("POST","http://50.23.124.68/api/v1.6/devices/raspberry-pi?token=private",'{"temperatura_rpi":'+str(500)+'}',{"Content-Type : application/json"}).text
Traceback (most recent call last):
  File "<stdin>", line 1, in <module>
  File "/flash/lib/urequest.py", line 67, in request
AssertionError: 
>>> 

If you want I can send the token for a message so that you help me to make tests and see the error that I get ...

[livius]

@scg94

i miss one parameter
try this

urequest.request("POST","http://50.23.124.68/api/v1.6/devices/raspberry-pi?token=private",'{"temperatura_rpi":'+str(500)+'}', None, {"Content-Type": "text/plain"}).text

[scg94]

@livius
Hey bro! SOLVED

>>> urequest.request("POST","http://50.23.124.68/api/v1.6/devices/raspberry-pi?token=private",'{"temperatura_rpi":'+str(30.67)+'}',None,{"Content-Type" : "application/json"}).text
'{"temperatura_rpi": [{"status_code": 201}]}'
>>>

Thanks a Lot...

[Wolli01]

@danielm Hi, I installed your lib, is there a sample code for HTTPS.Post?
I then want to get the data from my home page server.

PHP Server
<?php
//Sensor1

$p1 = $_GET["p1"]];
$p2 = $_GET["p2"];
$p3 = $_GET["p3"];

$p4 = $_GET["p4"];
$p5 = $_GET["p5"];

$p6 = $_GET["p6"];
$p7 = $_GET["p7"];
$p8 = $_GET["p8"];
$p9 = $_GET["p9"];
$p10 = $_GET["p10"];

$p11 = $_GET["p11"];
$p12 = $_GET["p12"];
$p13 = $_GET["p13"];
$p14 = $_GET["p14"];
$p15 = $_GET["p15"];

$p16 = $_GET["p16"];
$p17 = $_GET["p17"];
$p18 = $_GET["p18"];
$p19 = $_GET["p19"];
$p20 = $_GET["p20"];

$content = array($p1, $p2, $p3, $p4, $p5, $p6, $p7, $p8, $p9, $p10, $p11, $p12, $p13, $p14, $p15, $p16, $p17, $p18, $p19, $p20);
// Save the file
$entry = implode(";", $content);
file_put_contents("sensor1.txt", $entry);
?>

Translated with www.DeepL.com/Translator

[danielm]

@wolli01
Check the test code linked in this post:
https://forum.pycom.io/topic/4099/new-firmware-release-candidate-v1-20-0-rc0/12

[Wolli01]

@danielm I have tried now but unfortunately only empty strings are written in the file, either no data arrive or they are not read correctly. The PHP file will be called in any case.

[Wolli01]

@wolli01 Hier mein Code

import urequests
userdata = {"p1": "Wohnzimmer", "p2": "24.12.2018", "p3": "23.97"}
url = 'https://Homepage.de/live1.php'
res = urequests.post(url, headers={"Content-Type": "application/json", "Accept": "application/json"}, data= str(userdata))
res.close()

auf den PHP Server:
<?php
//Sensor1

$p1 = $_GET["p1"];
$p2 = $_GET["p2"];
$p3 = $_GET["p3"];

$inhalt = array($p1, $p2, $p3);
// Speichern der Datei
$eintrag = implode(";", $inhalt);
file_put_contents("sensor1.txt", $eintrag);
?>