Doubt on Gateway
-
Hi there, i have a doubt here. Is it the same for both of this
- lora = LoRa(mode=LoRa.LORA, rx_iq=True, region=LoRa.US915)
- lora = LoRa(mode=LoRa.LORA, frequency = 915000000)
As the problem i face is, i using #1 it have no response while using #2 it execute and give response.
-
You should specify both the region and frequency when using raw LoRa
lora = LoRa(mode=LoRa.LORA, rx_iq=True, frequency = 915000000, region=LoRa.US915)
The region parameter is optional an can usually be determined from the choice you made using the firmware upgrade tool, but it doesn't hurt to specify it.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login