Error when uploading to LoPy4

[Luxior]

It's been a few week that i can't upload anything anymore on my 2 LoPy4, i use expansion board 3.0, can't deal with the update for the expansion board(i'm on windows) but i updated the LoPy4 to the last firmware, and it solved nothing. I can run progs and it works well, but when i try to upload some, although it's saying "upload done", nothing happen.

Could you help me a little bit ?

Here is the upload msg and the error

i work on Visual Studio Code, with the plugin PyMakr

Thanks in advance.

[Luxior]

The file is called main.py, and it always was, so i don't think it can be it. I have a project created, and all the file are inside, i can access it through windows explorer as well, for the code, i can explain it, and post a screen about it if you want.

I use the internal RTC (even if i can't update the time, i can initialise it and do something when X date is reached, even if there is no save if the system is not alimented anymore, that's enough for me) i also use an analogic pin for taking a battery pourcentage, and i send a message when a pin receive something.

If you really want all the code here it is

from network import Sigfox
from machine import Pin
from machine import RTC
import pycom
import socket
import machine
import time

class ComSigFox:

    msg = ""
    localisation = ""
    socket = ""
    Etat = ""
    tailleManquante = 0
    Compteur = 0

    def __init__(self):
        # Initialise SigFox en Europe (RCZ1)
        localisation = Sigfox(mode=Sigfox.SIGFOX, rcz=Sigfox.RCZ1)

    def sendMsg(self, paramMsg):
        pycom.rgbled(0x007f00) # vert
        # Créer un socket SigFox
        s = socket.socket(socket.AF_SIGFOX, socket.SOCK_RAW)

        # Bloque le socket
        s.setblocking(True)

        # Configure le socket en Uplink seulement (False / True)
        s.setsockopt(socket.SOL_SIGFOX, socket.SO_RX, False)

        msg = paramMsg
        msg += " %"

        if((len(msg) ) < 5 ):      # Si le message fait en dessous de 5 caractères

            tailleManquante = 5 - (len(msg))

            for Compteur in range(tailleManquante):
                msg = msg + " "
                # On rajoute des espaces autant de fois
                # Que nécessaire pour avoir 5 caractères

        Etat = "Close"

        if(Etat == "Open"):
            Etat = "Open "

        msg = msg + Etat

        s.send(msg)

        return True

class Batterie:
    Voltage = 0
    Charge = 0

    def __init__(self):
        pass

    def getBattery(self):

        adc = machine.ADC(bits = 10)             # create an ADC object
        apin = adc.channel(pin='P20', attn = machine.ADC.ATTN_11DB)   # create an analog pin on P20

        i = 0
        MoyenneVolt = 0
        for i in range(1,50):

            time.sleep(0.1)
            val = apin() - 698
            Mesure = (val / 1024) * 5
            MoyenneVolt += Mesure
        Voltage = MoyenneVolt / 49
        print(Voltage)

        # Condition tension avec équation 0 - 10% de charge
        if(Voltage >= 1.32496 and Voltage <= 1.41429):

            Charge = (429.71806 * pow(Voltage,2)) - (1065.15152 * Voltage) + 656.90476

       # Condition tension avec équation 10 - 30% de charge
        if(Voltage > 1.41429 and Voltage <= 1.45895):

            Charge = (404108.59608 * pow(Voltage,3)) - (1741647.28089 * pow(Voltage,2)) + (2502325.58922 * Voltage) - 1198510

        # Condition tension avec équation 30 - 60% de charge
        if(Voltage > 1.45895 and Voltage <= 1.52594):

            Charge = (540257.28470 * pow(Voltage,4)) - (3000615.37231 * pow(Voltage,3)) + (6220087.42278 * pow(Voltage,2)) - (5699263.94063 * Voltage) + 1945763.58460

        # Condition tension avec équation 60  - 100% de charge
        if(Voltage > 1.52594 and Voltage <= 1.58921):

            Charge = (348000.83082 * pow(Voltage,3)) - (1629386.97406 * pow(Voltage,2)) + (2543268.59982 * Voltage) - 1323295.17637

        Charge = int(round(Charge,0))
        print("")
        print(Charge)
        print("")
        # La fonction int() n'arrondit pas, elle ne fait que tronquer, ainsi, il faut faire un int de l'arrondi qui seras par exemple
        # 49.0, le résultat seras donc le nombre 49.

        return Charge

class HorlogeRTC:
    rtc = 0
    Date = 0
    stringHeureDate = ""
    stringMinutesDate = ""
    stringSecondesDate = ""
    intHeureDate = 0
    intMinuteDate = 0
    intSecondesDate = 0
    HeureSouhaite = 0
    MinuteSouhaite = 0
    SecondeSouhaite = 0
    HeureFinal = 0
    MinuteFinal = 0
    SecondeFinal = 0
    TempsTotalAttente = 0

    def __init__(self):
        rtc = RTC()
        rtc.init((2018, 5 , 16 , 17, 19, 50, 0 ))

        # rtc.init(Année , mois , jours , heures , minutes, secondes, millisecondes)

    def getTime(self):
        Date = RTC().now()
        return Date

    def CalcTime(self,Date):

        Jour = False
        stringHeureDate = Date[3]
        stringMinutesDate = Date[4]
        stringSecondesDate = Date[5]
        s_intHeureDate = int(stringHeureDate) * 3600
        s_intMinutesDate = int(stringMinutesDate) * 60
        s_intSecondesDate = int(stringSecondesDate)
        s_TempsTotalActuel = s_intHeureDate + s_intMinutesDate + s_intSecondesDate

        HeureSouhaite = 17 * 3600

        MinuteSouhaite = 20 * 60

        SecondeSouhaite = 10

        s_TempsTotalSouhaite = HeureSouhaite + MinuteSouhaite + SecondeSouhaite

        # TempsTotalAttente en seconde

        if(s_TempsTotalSouhaite < s_TempsTotalActuel):
            TempsTotalAttente = (s_TempsTotalSouhaite - s_TempsTotalActuel) * -1

        else:
            TempsTotalAttente = s_TempsTotalSouhaite - s_TempsTotalActuel

        if(Jour == False):
            Jour == True
            return TempsTotalAttente
        elif(Jour == True):
            return 86400 + TempsTotalAttente

def TempoVerifMesure(TempsRestantHorlogeParam):

    Max = 0
    Diviseur = 0

    TempsAttenteBoucle = str(TempsRestantHorlogeParam)
    print(TempsAttenteBoucle)

    if(len(str(TempsAttenteBoucle)) == 5):
        Diviseur = 10000
        TempsAttenteBoucle = int(TempsRestantHorlogeParam) / Diviseur

    if(len(str(TempsAttenteBoucle)) == 4):
        Diviseur = 1000
        TempsAttenteBoucle = int(TempsRestantHorlogeParam) / Diviseur

    if(len(str(TempsAttenteBoucle)) == 3):
        Diviseur = 100
        TempsAttenteBoucle = int(TempsRestantHorlogeParam) / Diviseur

    if(len(str(TempsAttenteBoucle)) == 2):
        Diviseur = 10
        TempsAttenteBoucle = int(TempsRestantHorlogeParam) / Diviseur

    print(TempsAttenteBoucle)
    #Pin de l'ILS
    #ILS = Pin('P23',mode=Pin.IN,pull=Pin.PULL_UP)
    Max = Diviseur
    pycom.rgbled(0x7f0000) # red
    for i in range(0,Max,1):

        time.sleep(TempsAttenteBoucle)
        print("Tempo... {0}".format(Max))

        #if(ILS() == True):
        #    return True

    return True

if __name__=="__main__":

    Horloge = HorlogeRTC() # On initialise la classe HorlogeRTC
    Battery = Batterie() # On initialise la classe Batterie
    SigFox = ComSigFox() # On initialise la classe ComSigFox

    pycom.heartbeat(False)
    while(True):  #Le programme tourne en permanance dans cette boucle
        envoiSigFox = False

        while(envoiSigFox == False): # Tant que le message SigFox n'est pas envoyé on boucle ici
            Date = Horloge.getTime() # On récupère la date
            TempsRestantHorloge = Horloge.CalcTime(Date) # On calcule le temps restants avant la date souhaite en secondes
            intCharge = Battery.getBattery()
            if(TempoVerifMesure(TempsRestantHorloge) == False): # Condition pour que le message SigFox s'envoie (Temporisation de TempsRestantHorloge + vérif ILS)
                pycom.rgbled(0x7f7f00) # jaune

            else:
                SigFox.sendMsg(str(intCharge))
                envoiSigFox = True

[jmarcelino]

@luxior
Do you have a project open in VSCode?

Can you describe your project structure or perhaps post a screenshot of VSCode with your code open?

It looks like the files are on the board already but if not called from main.py they don't get run.

Thanks