Using Lopy1 for just LoRa

[robert-hh]

@burgeh You can do that with raw LoRa. if you look at the nanogateway examples, the gateway are configures as Raw Lora Devices. If it is just one direction, nodes to "gateway", that should be simple. If you want to implement a kind of downlink, you have to add more elements of a protocol, such that the nodes in your net can tell the types and purpose of messages they receive.
Obviously you have the problem of collisions and lost messages, which is not addressed by the basic transport mechanism.

[Burgeh]

@robert-hh

It may need two way connection eventually, but would a single LoPy setup as a "gateway" be able to handle multiple other units sending, and deal with collisions?

By deal with collisions I mean, it is receiving data from LoPy A and LoPy B sends, will it wait until A is done and not jumble the messages?

[robert-hh]

@burgeh The receiver can hardly control when two parties are sending at the same time. In that case, the transmission can fail. The sending nodes can check with lora.ischannel_free() before sending, if someone else is sending, and wait until that is finished.
Even when you try to implement something like a round robin protocol, some other devices may send.

[braulio]

How I can get transmition time with LoRaRAW??

[robert-hh]

@braulio I think you found that already in this post: https://forum.pycom.io/topic/3120/value-of-tx_time_on_air-of-the-lora-stats-function/5

[Burgeh]

@robert-hh

I don't quite understand the lora.ischannel_free() function. The first code below is my main "sending node". I then send it to a reciever which is using the second code. It works fine without the lora.ischannel_free(-120) condition, but when I use it it never actually sends. I only have one sending so I would not think it is busy. The rssi value is like -40.

from network import LoRa
import socket
import time
import pycom
import binascii
import machine
from machine import UART
#NODE B

# Please pick the region that matches where you are using the device:
# Asia = LoRa.AS923
# Australia = LoRa.AU915
# Europe = LoRa.EU868
# United States = LoRa.US915
lora = LoRa(mode=LoRa.LORA, frequency = 915000000, region=LoRa.US915, tx_power = 20)
s = socket.socket(socket.AF_LORA, socket.SOCK_RAW)
s.setblocking(False)

pycom.heartbeat(False)
pycom.rgbled(0x007f00) # green
receiveFlag = 0

while True:

    time.sleep(8)
    pycom.rgbled(0x0000ff) # blue
    id = binascii.hexlify(machine.unique_id())

    data = lora.stats()
    print("Stats %s" % data)
    if (lora.ischannel_free(-120)):
        s.send("ID: %s" % id)
        print("Sending ID")
        pycom.rgbled(0xFF00ff) # something...
        while (receiveFlag == 0):
            pycom.rgbled(0xFF0000) # RED
            data1 = s.recv(128)
            print("Look for Ack")
            if (b'%s' % id) in data1:
                receiveFlag = 1;
                s.send("ID: %s" % id)
            time.sleep(1)
    time.sleep(1)
    pycom.rgbled(0x00ff00) # green
    receiveFlag = 0

This is my receiver.

from network import LoRa
import socket
import time
import pycom


#NODE A

# Please pick the region that matches where you are using the device:
# Asia = LoRa.AS923
# Australia = LoRa.AU915
# Europe = LoRa.EU868
# United States = LoRa.US915
lora = LoRa(mode=LoRa.LORA, frequency = 915000000, region=LoRa.US915)
s = socket.socket(socket.AF_LORA, socket.SOCK_RAW)
s.setblocking(False)

pycom.heartbeat(False)
pycom.rgbled(0x007f00) # green

#TX_power is the value that is set on this chip not received.
while True:

    data1 = s.recv(128)
    if b'ID' in data1:
        print("ID Received")
        data = lora.stats()
        print("Stats %s" % data)
        print("Content %s" % data1)
        print("Sending Ack")
        reply = "Pong %s" % data1
        s.send(reply)
        pycom.rgbled(0x0000ff) # blue
        time.sleep(.5)
        pycom.rgbled(0x00ff00) # green
        s.recv(128)

Here is it working...

[robert-hh]

@burgeh If you init a Lora instance and call is_channelfree() with various value from the REPL, what do you get? Since the test window is pretty short, it is always possible that noise is seen as RF carrier. In my quick test with a LoPy4 I had the following results when calling lora.ischannel_free() with various values:

-120dB Always False
-110dB Always False
-105dB ~50% False, 50% True
-100dB About 100% True

With a LoPy 1 the 50% point was at -117dB, and -115dB was always True. So it looks as if you have to find the proper value by testing.

[Burgeh]

@robert-hh I've tried -120 and -100, both failed everytime. One issue I noticed is that the first time I call lora.stats() the rssi value is 0. I tried sending first and then checking it, and it remains at 0.

Also, this is_channelfree() function the only way to avoid colliding? Because if a unit is just far away, it might not be allowed to send for example.

[robert-hh]

@burgeh lora.stats() returns reasonable values after a packet has sent or received. Avoiding collisions is in general not possible. Looking for another station sending at the same time is more a polite behavior than a robust method. You can only see stations close to your place. Remote stations which also can cause a collision are invisible.

[Burgeh]

@robert-hh So a remote raw lora receiver with a lot of nodes sending it is just inevitable that collisions happen? My current "solution" is to send and wait for it to send back an acknowledge, if not just wait a random period of time.